496437
9
Zoom out
Zoom in
Previous page
1/98
Next page
En
ENGLISH
9
SETTING THE CLOCK
When the AC cord is connected for the first time, the clock on
the display flashes.
Set the time as follows while the power is off.
1 Press ENTER.
The display becomes a little brighter.
2 Within 4 seconds, turn MULTI JOG to designate
the hour and the minute.
The time advances by turning it to the right, and decreases
by turning it to the left.
N/M on the main unit is also available. Press the button
repeatedly. To change the time rapidly in 10-minute steps, hold
it down.
3 Press ENTER.
The clock starts from 00 seconds.
NOTE
When the clock is set for the first time after purchase
Everything on the display will clear.
This is because the power economizing mode of the unit is
activated, and is not a malfunction.
The power economizing mode can be canceled. See page 8 for
details.
To correct the current time
Press POWER 6STANDBY/ON to turn the unit off. Carry out
steps 1 to 3 above.
To display the current time
Press CLOCK while pressing SHIFT on the remote control. The
clock is displayed for 4 seconds.
When operating on the main unit, press CLOCK while the power
is on and ENTER while the power is off (standby).
To switch to the 24-hour standard
Display the current time, and press BAND/DIGITAL/ANALOG on
the unit within 4 seconds.
Repeat the same procedure to restore the 12-hour standard.
In the 12-hour standard, AM 12:00 indicates midnight and PM
12:00 indicates noon.
If the clock display flashes while the power is off
This is caused by a power interruption. The current time needs
to be reset.
If power is interrupted for more than approximately 24 hours, all
settings stored in memory after purchase need to be reset.
PREPARATIONS
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa AV-D58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa AV-D58 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info