14740
5
Zoom out
Zoom in
Previous page
1/32
Next page
INSTALLATIONS
Precautions
Select the mounting location very carefully,
referring to the following points.
Make sure that there is no fuel tank, wiring or
piping on the other side of the mounting surface.
Make sure that the installation of the unit will not
hinder the movement of the deck lid or interfere
with the spare tire, etc.
Use only the supplied mounting kit for safe and
proper installation.
Removing the transport screws
Find the three transport screws at the bottom of
the unit, which lock the unit’s mechanism during
transport. Remove these screws before
installation.
Retain these screws and replace them in the
original positions if the unit is transported for
service or maintenance.
Mounting angle setting levers
Be sure to change the position of both mounting
angle setting levers according to the angle at
which the unit is to be installed.
Mounting angla setting levers
Insert a pointed object such as a screw driver or
ball-point pen, etc. into the low spot of the lever
and slide the lever to the position from among
HORIZONTAL, 45°, and VERTICAL positions.
Notes
Be sure to eject the disc magazine when you set the
levers.
Be sure to set both levers to the same position.
Be sure to set the levers exactly at the position (notch).
If the lever is deviate from the position, the sound may
drop out.
. Care must be taken when you mount the unit at the
angle of lower than level. The diet magazine may drop
if you eject the magazine.
Do NOT turn over the unit or slide the lever when the
unit isactivated. Doing so may damage the mechanism
or the discs in the unit.
. The mounting angle setting levers on each side of the
unit are factory-set to the HORIZONTAL position.
When you complete the setting, attach the supplied
adhesive labels @ over the slots.
ENGLISH 4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa ADCM60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa ADCM60 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info