Manual Aiwa ADCEX106 (page 5 of 32) (English, French, Spanish)

14734

Zoom out

Zoom in

1/32

●INSTALLATIONS

Precautions

Select the mounting location very carefully,

referring to the following points.

● Make sure that there is no fuel tank, wiring or

piping on the other side of the mounting surface.

● Make sure that the installation of the unit will not

hinder the movement of the deck lid or interfere

with the spare tire, etc.

● Use only the supplied mounting kit for safe and

proper installation.

Removing the transpotl screws

Find the three transport screws at the bottom of

theunit, which lockthe unit’smechanism during

transport. Remove these screws before

installation.

Retain these screws and replace them in the

original positions if the unit is transported for

service or maintenance.

Mounting angle setting levers

Be sure to change the position of both mounting

angle setting levers according to the angle at

which the unit is to be installed.

Mounti~g angle

setting levers

Insert a

~ointed obiect such as a screw driver or

45’

n ‘if

45 Q

RIZONTAL

HORIZONTAL

“g

ball-point pen, etc.-into the low spot of the lever

and slide the lever to the position from among

HORIZONTAL, 45°, and VERTICAL positions.

Notes

Be sure to eject the disc magazine when you set the

levers.

● Be sure to set both levers to the same position.

● Be sure to set the levers exactly at the position (notch).

If the lever is deviate from the position, the sound may

drop out.

● Care must be taken when you mount the unit at the

angle of lower than level. The disc magazine may drop

if you eject the magazine.

● Do NOT turn over the unit or slide the lever when the

unit is activated. Doing so maydamagethe mechanism

or the discs in the unit.

● The mounting angle setting levers on each side of the

unit are factory-set to the HORIZONTAL position.

● When you complete the setilng, attach the supplied

adhesive labels @ over the slots.

,,.-,

,,, ,,.,

;,” ,

: ,,/

ENGLISH 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa ADCEX106 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa ADCEX106 Manual

Product: