Manual Airwell RC4 remote control (page 8 of 14) (English)

574673

Zoom out

Zoom in

1/14

SLEEP FUNCTION

Press SLEEP button (7) to select the SLEEP function.

The sleep icon light while the sleep OFF time icon and the time which is 7 hours

after current time blink as deafult. The default setting can be changed from 3 hr.

to 12 hr. by pressing up and down buttons HOUR+ (11) and HOUR- (12)

respectively.(The sleep timer will display the default time or the setting time plus

the current time initially in the display).

For example : currrent time is 23:00 and the sleep mode is set , the sleep mode

OFF time will be 6:00 . If the sleep off time is set to 10 hr, then the sleep mode

OFF time will be 9:00.All other timers will temporarily be suspended during the

activation of the sleep timer.

The other timers will resume operation at the end of the SLEEP time.

To cancel the SLEEP function press one of the following:

START / STOP button (1)

SLEEP button (7)

NOTE: In some models the SLEEP icon lights only and the OFF time is set for

seven hours as default.

AUTO COOLING / HEATING OPERATION

Select the AUTO mode by pressing MODE button (2). Switch to the desired

FAN SPEED or to AUTO FAN by pressing button (4). Select suitable

temperature setting. The air flap will automatically move to either horizontal

air delivery for cooling or to vertical air delivery for heating. At start, the air

conditioner will select its mode of operation according to the room

temperature and the temperature setting.

DRY OPERATION

Select the DRY mode by pressing MODE button (2). Select the suitable

temperature setting. While in DRY mode, the air conditioner will operate at low

fan speed, regardless of the fan setting on the LCD operation display. Fan

might terminate operation from time to time to prevent from over cooling. By

selecting the mode, the air flap will move automatically to optimal horizontal

air delivery position.

SELECTING THE TEMPERATURE

Press TEMP buttons (5) or (6) to change the temperature setting in the LCD

operation display (13). The temperature setting is shown in degrees

centigrade. A higher number indicates a higher room temperature. A lower

number indicates a lower room temperature

I FEEL FUNCTION

Press I FEEL button (3) to activate the I FEEL function. Thermometer sign

will appear on the LCD operation display (13). Select suitable temperature

setting.

Make sure that the remote control unit is aimed at the air conditioner, with

the I FEEL sensor (14) in front. Prevent the I FEEL sensor from being

affected by heat sources such as lamps, heaters, direct sun, etc. or from

being directly affected by the air conditioner air flow. These may cause the

sensor to transmit the wrong temperature data, thereby disturbing the

performance of the I FEEL function.

How do i switch from f to c on the remote control Submitted on 10-6-2023 at 16:48
Reply Report abuse
How to change temperature Farenheit into Celcius on RC4 Submitted on 28-6-2021 at 15:30
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airwell RC4 remote control in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Airwell RC4 remote control

Airwell RC4 remote control User Manual - German - 15 pages

Airwell RC4 remote control User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airwell RC4 remote control Manual

Product: