590226

Airwell Multisplit YAZE CINCO DCI Manual

6
Zoom out
Zoom in
Previous page
1/19
Next page
w’
ATTACHED ACCESSORIES
INSTALLATION / SERVICE TOOLING FOR R410A Changes
Gauge manifold As the working pressure is high, it is impossible to measure the working pres-
sure using conventional gauges. In order to prevent any other refrigerant from
being charged, the port diameters have been changed.
Charge hose In order to increase pressure resisting strength, hose materials and port sizes
have been changed (to 1/2 UNF 20 threads per inch). When purchasing a
charge hose, be sure to confirm the port size.
Electronic scale for
refrigerant charging
As working pressure is high and gasification speed is fast, it is difficult to read
the indicated value by means of charging cylinder, as air bubbles occur.
Torque wrench
(nominal dia. 1/2, 5/8)
The size of opposing flare nuts have been increased. Incidentally, a common
wrench is used for nominal diameters 1/4 and 3/8.
Flare tool (clutch type) By increasing the clamp bar's receiving hole size, strength of spring in the tool
has been improved.
Gauge for projection adjustment Used when flare is made by conventional flare tool.
Vacuum pump adapter
& check valve
Connected to a conventional vacuum pump. It is necessary to use an adapter
to prevent vacuum pump oil from flowing back into the charge hose. The charge
hose connecting part has two ports -- one for conventional refrigerant (7/16
UNF 20 threads per inch) and one for R410A. If the vacuum pump oil (mineral)
mixes with R410A a sludge may occur and damage the equipment.
Gas leakage detector Exclusive for HFC refrigerant.
Incidentally, the “refrigerant cylinder” comes with the refrigerant designation (R410A) and protector coating in the U.S’s ARI specified rose colour
(ARI colour code: PMS 507). Also, the “charge port and packing for refrigerant cylinder” requires 1/2 UNF 20 threads per inch corresponding to
the charge hose’s port size.
CAUTION R410A Air Conditioner Installation ______________________________________________________
THIS AIR CONDITIONER ADOPTS THE NEW HFC REFRIGERANT
(R410A) WHICH DOES NOT DESTROY OZONE LAYER. R410A
refrigerant is apt to be affected by impurities such as water, oxidizing
membrane, and oils because the working pressure of R410A refrig erant
is approx. 1.6 times of refrigerant R22. Accompanied with the adoption
of the new refrigerant, the refrigeration machine oil has also been
changed. Therefore, during installation work, be sure that water, dust,
former refrigerant, or refrigeration machine oil does not enter into the
new type refrigerant R410A air conditioner circuit. To prevent mixing of
refrigerant or refrigerating machine oil, the sizes of connecting sections
of charging port on main unit and installation tools are different from
those used for the conventional refrigerant units. Accordingly, special
tools are required for the new refrigerant (R410A) units. For connecting
pipes, use new and clean piping materials with high pressure fittings
made for R410A only.
Moreover, do not use the existing piping because there are some
problems with pressure fittings and possible impurities in existing
piping.
Changes in the product and components
In air conditioners using R410A, in order to prevent any other refrigerant
from being accidentally charged, the service port diameter size of the
outdoor unit control valve (3 way valve) has been changed. (1/2 UNF
20 threads per inch).
In order to increase the pressure resisting strength of the refrigerant
piping, flare processing diameter and opposing flare nuts sizes have
been changed. (for copper pipes with nominal dimensions 1/2 and
5/8).
In case of pipes welding please make sure to use dry Nitrogen inside
the pipes.
Use copper tube of special thickness for R410A: 1/4”-1/2” 0.8 mm
5/8”-3/4” 1 mm
7/8” 1.1 mm
Description Amount
Name Use
1 Technician’s installation manual Installation instructions
4 Rubber mounting pads Padding of the outdoor unit
1 Drain elbow Connecting drain hose to outdoor
2
Transition unions 1/2” - 3/8” Flare connection transitions in outdoor unit
2 T Flare connection transitions in outdoor unit
2 Transition unions 3/8” - 1/4” Flare connection transitions in outdoor unit
4
ransition unions 1/2" - 5/8"
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airwell Multisplit YAZE CINCO DCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airwell Multisplit YAZE CINCO DCI in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info