Manual Airwell MFR - Mobile (page 14 of 20) (English)

725560

Zoom out

Zoom in

1/20

Operation

Swing button

Wireless button

(optional)

Sleep(Eco) button

Fan/Ion button(Ion is optional)

Used to initiate the Auto swing feature. When

the operation is ON, press the SWING button

can stop the louver at the desired angle.

Used to initiate the SLEEP/ECO operation.

Timer button

Used to initiate the AUTO ON start time and

AUTO OFF stop time program, in conjuction

with the + & - buttons. The timer on/off indicator

light illuminates under the timer on/off settings.

Mode button

Selects the appropriate operating mode. Each

time you press the button, a mode is selected in

a sequence that goes from AUTO), COOL, DRY,

FAN and HEAT (cooling only models without).

The mode indicator light illuminates under the

different mode settings.

Power button

Up (+) and Down (-) buttons

Used to adjust (increasing/decreasing)

temperature settings in 1°C/1°F (or 2 °F)

increments in a range of 17°C/62°F to

30°C/86°F (or 88°F) or the TIMER setting in a

range of 0~24hrs.

NOTE: The control is capable of displaying

temperature in degrees Fahrenheit or

degrees Celsius. To convert from one to the

other, press and hold the Up and Down

buttons at the same time for 3 seconds.

Control the fan speed. Press to select the fan

speed in four steps-LOW, MED, HIGH and AUTO.

The fan speed indicator light illuminates under

different fan settings. When select AUTO fan

speed, all the fan indicator lights turn dark. On

some models, when select AUTO fan speed, all

the fan indicator lights illumiante(optional).

NOTE: Press this button for 3 seconds to initiate

ION feature. The ion generator is energized and

will help to remove pollen and impurities from the

air, and trap them in the filter. Press it for 3

seconds again to stop the ION feature.

Used to initiate the Wireless function. For the

first time to use Wireless function, press and

hold the swing button for 3 seconds to initiate the

Wireless connection mode. The LED DISPLAY

shows 'AP' to indicate you can set Wireless

connection. If connection(router) is successful

within 8 minutes, the unit will exit Wireless

connection mode automatically and the Wireless

indicator illuminates. If connection is failure

within 8 minutes, the unit exits Wireless

connection mode automatically. After Wireless

connection is successful, you can press and

hold SWING and DOWN (-) buttons at the same

time for 3 seconds to turn off Wireless function

and the LED DISPLAY shows 'OF' for 3 seconds,

press SWING and UP(+) buttons at the same

time to turn on Wireless function and the LED

DISPLAY shows 'ON' for 3 seconds.

NOTE: When you restart the Wireless function,

it may take a period of time to connect to the

network automatically.

Power switch on/off.

LED display

Shows the set temperature in °C or °F("°F"

no display for some models) and the Auto-timer

settings. While on DRY and FAN modes, it

shows the room temperature.

Shows Error codes and protection code:

E1-Room temperature sensor error.

E2-Evaporator temperature sensor error.

E3-Condenser temperature sensor error

(on some models).

E4-Display panel communication error.

EC-Refrigerant leakage detection malfunction

(on some models).

P1-Bottom tray is full--Connect the drain hose

and drain the collected water away.If

protection repeats,call for service.

Note: When one of the above malfunctions

occurs, turn off the unit, and check for any

obstructions. Restart the unit, if the

malfunction is still present, turn off the unit

and unplug the power cord. Contact the

manufacturer or its service agents or a similar

qualified person for service.

Exhaust hose installation

The exhaust hose and adaptor must be installed or

removed in accordance with the usage mode.

For COOL,HEAT(heat pump type) or AUTO mode

must be installed exhaust hose.

For FAN,DEHUMIDIIFY or HEAT(electrical heat

type) mode must be removed exhaust hose.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airwell MFR - Mobile in the language / languages: English as an attachment in your email.

The manual is 20,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airwell MFR - Mobile Manual

Product: