28962
29
Zoom out
Zoom in
Previous page
1/75
Next page
29
T-CUT (THROTTLE-CUT)
Another useful function provided by the RD6000 Super for engine powered models is T-CUT, Throttle Cut. Normally
you set your throttle stick in the extreme low position and use EPA and the digital trim to obtain a steady low engine
idle speed. However, if you want to stop the engine at the end of the flight you would have to use the throttle digital
trim and later re-trim for proper idle. The T-CUT function solves this problem by providing a push button that, when
pushed, overrides the throttle sticks low throttle position and drives your throttle servo to a lower position, stopping
the engine. The throttle stick must be in the low position for the throttle cut to function.
In order to use T-CUT, press either the (CH -) or the (CH +) key to select TH on the Channel indicator.
Next, press the FUNCTION down key several times to obtain the following screen.
Press the DEC -/NO key to set a value of –100%. Place the throttle stick in the extreme low position. Press and hold
down the Throttle Cut push button located above the elevator/aileron stick assembly. The throttle servo will then rotate
further to close the engines carburetor and stop the engine.
etc
TH
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info