28962
16
Zoom out
Zoom in
Previous page
1/75
Next page
16
CNT (CONTROL CENTERING)
Your RD6000 Super allows you to fine-tune the CENTER or neutral position of all flight control servos. After hooking
up your controls and mechanically centering all linkages to the approximate positions, press the FUNCTION down key
to arrive at the following screen for the Elevator control.
(Note that the Aileron, Throttle, Rudder and Flap centering operates in the same manner when you select that channel
on the upper part of the screen. You can move across to the CNT function of each channel as well as some of the
other functions by pressing the (CH+ ) key.
By pressing the INC+/YES or DEC-/NO keys you can vary the value from 0 to + or - 100%. Default is 0%
IMPORTANT NOTE:
It is desirable to adjust the control linkages as close as possible to the correct center positions, then use the CNT
(CENTER) commands to “Fine-tune” the exact position of the control surface when the transmitter control is in
neutral.
Using a large amount of electronic centering adjustments will decrease the total throw available for that channel. In
particular, centering adjustments greater than + or - 50% will tend to make the extreme stick position on one end less
responsive!
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info