28960

Airtronics RD6000sport Manual

58
Zoom out
Zoom in
Previous page
1/63
Next page
58
COMPENSATION MIXERS (C-Mix)
The RD6000 Sport has two compensation mixers available to handle advanced mixing needs. These are in addition to
the predefined mixers. Compensation mixers C-Mix 1 and C-Mix 2 are only available in the Aircraft mode of operation
and do not have any switch to turn them on or off when activated.
The purpose of a Compensation Mixer is to allow one transmitter control input to affect two flight functions. A
common mix would be Aileron to Rudder to achieve coordinated turns without moving the rudder stick. However, the
RD6000 Sport provides a predefined mixer for this function.
Press the (CH+) key to move across the CH indicator and access the “etc” screen. Next press the FUNCTION down
key and locate the following screen names in order:
MAS 1: EL = (C-Mix #1 Master channel) example EL “Elevator”
SLV 1: EL = (C-Mix #1 Slave Channel) example EL “Elevator”
E>E 1: 0% = ( C-Mix #1 mixing percentage) Adjust from +150% ~ -150% example “Elevator to Elevator”
MAS 2: EL = (C-Mix #1 Master channel) example EL “Elevator”
SLV 2: EL = (C-Mix #1 Slave Channel) example EL “Elevator”
E>E 2: 0% = ( C-Mix #1 mixing percentage) Adjust from +150% ~ -150% example “Elevator to Elevator”
NOTE:
At this point, both C-Mix 1 and C-Mix 2 are not activated (factory default).
To activate both C-Mix 1 and C-Mix 2 you must first change the (SW-R) from NOR (normal) to REV (reverse). See
page number 27 on how to change.
REMEMBER:
When you activate both C-Mix 1 and C-Mix 2, they both will be on all the time, there is no toggle switch to turn them
off or on. Any number besides “0” in the percentage screen will cause the slave channel to move in either direction.
Changing the SW-R (switch reverse) will also change the switch direction or both your Dual Rate switches and will
reverse the direction of your Gear and Flap switches. If you have setup any of the features mentioned, please review
your settings before flying.
In the following example, I will use C-Mix 1 to mix Rudder to Elevator as maybe needed for knife edge flight.
Start by pressing the (CH+) key until you reach “etc” .
etc
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000sport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000sport in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info