Manual Airthings Corentium Pro (page 2 of 5) (English)

807125

Zoom out

Zoom in

1/5

SPECIFICATION DESCRIPTION

Sampling Method Passive radon diffusion chamber

Alpha spectrometry

Detection Method 4 silicon photodiodes in 4

distinct radon chambers

Detector Power Supply 3 AA alkaline batteries (LR06)

~ 15-month battery life

Dimensions 5.5 x 5.5 x 1.2 inches 140 x 140

x 30 mm

Weight 10.6 ounces (including

batteries)

300 grams (including batteries)

Operation Environment 39 to 104 °F

4 to 40 °C

5% RH to 85% RH noncondensing

50 kPa to 110 kPa

Measurement Range 0 - 2700 pCi/L

0 - 100 000 Bq/m3

Measurement

Uncertainty

After 24 hours

After 7 days

σ ~ 7 % ± 0.15 pCi/L

σ ~ 7 % ± 5 Bq/m3

σ~ 5 % ± 0.06 pCi/L

σ ~ 5 % ± 2 Bq/m3

Diffusion Time Constant 25 minutes

Temperature Sensor

Range

Resolution

Accuracy

39 to 104 °F

4 to 40 °C

0.36 °F

0.2 °C

± 1 °F (typical), ± 2 °F (max)

± 0.5 °C (typical), ± 1 °C (max)

Humidity Sensor

Range

Resolution

Accuracy

5% RH to 85% RH (non-

condensing) 0.5% RH

± 4.5% (in range 20 - 85% RH)

SPECIFICATION DESCRIPTION

Barometric Pressure

Sensor

Range

Resolution

Accuracy

50.0 kPa to 115.0 kPa

0.06 kPa

± 1 kPa

Memory The internal memory stores 5

years of hourly datapoints

Memory Capacity ~ 1 900 days of measurements

~ 5 datasets of one-year length

~ 177 datasets of 1-week

length

~ 325 datasets of 2-day length

Memory Type Non-volatile ash memory

SPECIFICATIONS

for securing the instrument from theft, being moved

during measurement, etc.

Corentium Pro is designed to be used in horizontal

orientation only, do not use the monitor in vertical

orientation.

STORAGE INFORMATION

Store the Corentium Pro in its protective case, with

batteries installed, in a location with low to normal

relative humidity and avoid extreme temperatures.

Storing Corentium Pro in a vehicle is not

recommended.

Insert fresh batteries before long-term storage. Do not

allow batteries to die in the monitor at any time.

Contact the manufacturer if the monitor requires service

or repairs. Do not try to open the Corentium Pro.

Note: Failure to follow these usage and storage

requirements will void the warranty.

CALIBRATION

The monitor is tested, quality assured, and calibrated

by manufacturer. Calibration certicate is valid for one

year. Most jurisdictions require annual calibrations for

professional use.

GETTING STARTED

Use the Torx 6 screwdriver to open the battery

compartment and insert the batteries. Allow 45

seconds for the monitor to self-test, and then it will

begin recording information.

The Corentium Pro software system is comprised of

two parts, the mobile app which runs on the user’s

mobile device and is used for initiating and concluding

radon tests, and the online Pro Dashboard which is the

central hub for a radon testing company’s operations.

We have created a series of short instructional videos

to help you get started quickly: go to help.airthings.

com/pro and then the video section.

CREATING AN AIRTHINGS ACCOUNT

In order to use the mobile app and online Pro

Dashboard a user must create an Airthings account by

visiting the website at pro.airthings.com and clicking

on the “Sign Up with Airthings” button. Follow the

remaining prompts to create an account.

USING THE ONLINE PRO DASHBOARD

Radon tests are uploaded from the mobile app

to the Dashboard and can be accessed from any

location through a modern web browser. This enables

technicians to upload a radon test to the Dashboard

while in the eld, and the radon test can be analyzed

from a remote location by a specialist so a radon report

can be generated.

Logging into the Online Dashboard

To log into the Dashboard, open a web browser

and go to pro.airthings.com and enter in your login

information from the section above.

Managing Monitors of the Company

To add a monitor to the company, log into the

Dashboard and click on the monitor management icon

in the left menu, and then click on the “Add a Monitor”

bar at the top of the page. Enter in a nickname for the

monitor for easier identication of the monitor, and

then enter the monitor’s serial number and click on the

green checkmark to the right. Once a monitor is added

to the company it must be conrmed in the mobile app

when in proximity to the monitor. This is a safety feature

to help ensure that only monitors belonging to the

company can be added to the Dashboard.

Modifying Company Information

To modify company information, log into the

Dashboard and click on the company prole icon in

the left menu. The company name, mailing address,

phone number, email address, and company logo

can be modied. Additionally, company certications/

licenses can be added or modied.

USAGE

USAGE & SAFETY

The radon sensors in Corentium Pro are made for

inside use only. Avoid storing or using the monitor

in environments with high humidity, extreme heat, or

freezing conditions. Condensation can form on the

monitor if it is moved from a warm location to a cold

location or vice versa. If condensation forms on the

monitor, remove the batteries and leave it in a dry

environment for 2 hours. The monitor should not be

used in environments with more than 85% relative

humidity. The unit must not be exposed to direct sunlight

for extended periods. Avoid subjecting the monitor to

shocks, impacts, pressure, vibrations, dust, or moisture.

Only use alkaline AA (LR06) batteries. The batteries must

not be exposed to re or other extreme heat. The battery

terminals must not be touched, and they must be kept

free from dust, sand, liquids and other foreign objects.

Use a Kensington cable Lock (often used for laptops)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airthings Corentium Pro in the language / languages: English as an attachment in your email.

The manual is 0.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airthings Corentium Pro Manual

Product: