Manual Airpress KM50-350 (page 36 of 56) (English, German, Dutch, French)

594041

Zoom out

Zoom in

1/56

5 The V-belt should be checked after every 1000 hours. At the right tension, the

V-belt can easily be turned 45 degrees by hand. If tension is too high, strong

corrosion will occur or eventually the spindle of motor or pump may break. At

too little tension, the efficiency of the compressor decreases considerably.

Tightening the V-belt goes as follows:

Dismount the belt protector (3).

Unscrew the fastening bolts on

the motor sledge.

Remove the V-belt. Place the

motor at the wright distance from

the pump.

Make sure that the pulley of the

motor runs in the same line

parallel with the flywheel on the

pump (see drawing). Tighten

the fastening bolts and replace

Motor Pump

the V-belt. Worn V-belts should

pulley pulley

be replaced by new ones with

the same size.

6 Before maintenance of the fuel engine, first read the instruction manual of the

fuel engine.

Note:

Regular maintenance of your compressor will increase durability and

reliability.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress KM50-350 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress KM50-350 Manual

Product: