Manual Airpress HL425-200 (page 26 of 52) (English, German, Dutch, French)

593970

Zoom out

Zoom in

1/52

the power, voltage and frequency of the motor. Check that there is a ground

connection and a regulation differential switch upstream.

 Use cables with an adequate section and avoid use of free and inadequately

insulated connections.

 Never open the pushbutton box on the motor. Should this be necessary, contact

a qualified electrician.

 Make sure that the machine and the cable never come in contact with water.

 Treat the power cable with care. Do not attempt to move the machine by pulling

the cable. Do not yank the cable to unplug it; keep the cable away from excessive

heat, oil and sharp objects.

 Never leave the machine unattended with the power supply "on". Also

disconnect the power cable when:

- you leave the machine, even for a short time

- not in use

- carrying out maintenance work

- changing attachment or moving the machine.

 WARNING: the warnings, cautions and instructions discussed in this

instruction manual cannot cover all possible conditions and situations that may

occur. It must be understood by the operator that common sense and caution

are factors which cannot be built into this product, but must be supplied by the

operator.

 Only those persons who are aware of how to use the compressor by having read

this manual, should use the machine. Injudicious use may cause danger.

 See page 42 / 43 for explanation of danger plates.

3.0 PLACING

The AIRPRESS compressor should be placed in such way that all points, destined

to carry it will really do so. Take also care of a horizontal position.

The engine should get sufficient cooling air; so never cover the ventilating openings.

Place the compressor in a cool dustfree space. Never place the compressor in a

room where will be sprayed. Paint spray will clog the air filter and will also deposit on

the compressor. Mind that the drain tap for condensation water (l) and the level

gauge will always remain attainable. We suggest to leave a space of approximately

30 cm for ventilation and maintenance.

Notice: Insufficient air supply, too high temperature and fouling of the air filter

reduce the efficiency of the compressor considerably.

3.1 ELECTRIC CONNECTION

At the factory the machine is already fully equipped with cables. The machine now

has to be connected to your own electricity supply. Connect the machine to a

separate group. Beware that voltage and amperage of your electric circuit meet the

needs of the motor. Use only cables with the right diameter. The factory suggests to

use cables of at least 2.5 qmm.

It is well advised to place a main switch between the compressor installation and the

electric circuit, so you can shut off all the electricity before maintenance. Use only

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress HL425-200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress HL425-200 Manual

Product: