Manual Airpress 36852 - HL 360-50 compact 2005 (page 19 of 44) (English, German, Dutch, French, Spanish)

593985

Zoom out

Zoom in

1/44

4.0 FIRST USE

1. Check if the instructions mentioned above have been executed.

2. On delivery the compressor mostly is filled with oil. Fill about 0,8 litres

compressor oil until the red circle on the oil leveler.

3. Install the air filter (1) in the cylinder head (first remove the synthetic plug).

4. Install the oil filler cap (6) on the crank case lid (first remove the synthetic plug).

5. Avoid the use of extension cables. If you use them, unroll them completely and

use cables of sufficient capacity. Tabel for extension cables:

0 - 10 meter: 3 x 2,5 mm

• Switch on the compressor by means of the pressure switch (7).

• The compressor will now operate, unless the air receiver is still under pressure

(pressure gauge 2).

• Switch the machine, during operation, exclusively off by means of the button on

the automatic pressure switch (7); the pressure circuit will be vented and the

compressor can start again uncharged.

5.0 OPERATION

1. The automatically operating compressor will stop at a pressure of 8 bar. When

air is used again and the pressure in the tank falls to 6 bar, the compressor will

start again.

2. Most pneumatic machines are suitable for an operating pressure of about 6

bar. For some applications this pressure is even lower. To be able to set the

right pressure, the compressor is provided with a reducing valve (3). This valve

can set the pressure of the air receiver (of course never higher than the

pressure in the air receiver).

3. The setting of the reducing valve is done as follows: switch the button to set the

right pressure (to the left to lower the pressure, to the right to increase it). The

set pressure can be read on the pressure gauge (4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36852 - HL 360-50 compact 2005 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress 36852 - HL 360-50 compact 2005 Manual

Product: