594049
39
Zoom out
Zoom in
Previous page
1/56
Next page
37
7.4 Compressor disposal
In case you need to get rid of your compressor, it is compulsory to get rid of all the
parts and components according to the laws in force. In any case, contact the
company or board in charge of elimination.
8. TROUBLESHOOTING
Fault Cause Remedy
The pressure switch valve
leaks when the compressor
is idle.
Non-return valve seal
defective.
Make air in the tank flow
out (Fig. 10), then remove
the non-return valve plug
and clean the seat and the
seal (Fig. 12). If necessary
replace the seal.
The pressure switch valve
leaks when the compressor
is running.
Failure of empty-start valve. Replace the valve
(Fig. 5).
The compressor stops and
does not start.
Overload cutout operated
because of motor
overheating.
Winding burnt out.
Cut off voltage and press
the button to start
(Abb. 6/6a).
Contact a specialized
technician.
The compressor stops
after reaching the max.
pressure and the safety
valve operates.
Wrong operation or
pressure switch broken.
Contact a specialized
technician.
The compressor does not
reach the set pressure and
overheats too much.
Compressor head gasket
broken or valve faulty.
Stop the compressor
immediately and contact a
specialized technician.
The compressor is noisy
with metallic clangs.
Bearing seizure. Stop the compressor
immediately and contact a
specialized technician.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36821 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info