594049
38
Zoom out
Zoom in
Previous page
1/56
Next page
36
7.1 Condensate drainage (weekly) (Fig. 10)
For models without drier and automatic condensate drain.
Place a container under the drain valve and open the cock by turning it anti-clockwise.
As our "Oilless" series compressors do not require lubricant, the condensate
flowing out the tank is not polluted and can be eliminated through the sewer
system.
7.2 Cleaning the suction filter (monthly) (Fig. 11)
These models have one or two suction filters next to the compressor head. To open,
unscrew the middle screw.
Take out the filtering component and rinse with water and soap.
Dry completely and refit. Close the filter.
Do not operate the compressor without the suction filter fitted, as foreign bodies
or dust could seriously damage the inside components.
7.3 Further servicing
Every 6 months or 500 working hours
It is recommended to clean carefully all finned parts of the compressor. In this way
the cooling system is kept efficient and ensures a better performance of the
compressor (Fig. 9).
Every year or 1000 working hours
Change the filtering component (follow the instructions written in section § 7.2).
Every 2 years or 2000 working hours
1) Check and clean the suction and delivery valves
2) Check the non-return valve and replace the seal D, if necessary (Fig.12).
When you perform the above operations, we recommend to replace the
relevant seals.
At least every 3 years, replace the alumina contained in the drier. Such time span
has been determined by supposing an average use of the compressor (i.e. 2 hours
a day); in case of a more intense activity, have the air humidity rate checked by a
specialised technician and, if necessary, replace alumina in advance.
USE ONLY ORIGINAL SPARE PARTS, AVAILABLE AT ALL AUTHORIZED
SERVICE CENTRES. IMITATION SPARE PARTS MAY DAMAGE YOUR
COMPRESSOR IRREPARABLY.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36821 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info