594049

Airpress 36821 Manual

32
Zoom out
Zoom in
Previous page
1/56
Next page
30
2.3 Safety devices
• Pressure switch (fig. 5): adjusts both STOP and START pressure.
• Safety valve: after reaching the max. pressure value it releases the air off.
Compressors with single-phase electric motor are equipped with overload
cut-out (fig. 6) which operates as a safety device in case of motor overload.
When the motor overheats because of any fault arisen, the overload cutout
automatically releases and cuts off power, thus preventing the motor from
being damaged. Wait a few minute (about 5) before resetting the device, then
restart the motor.
It you restart the compressor and the overload cutout releases again, turn the main
switch to position (0) unplug the equipment and contact any Authorized Service
Centre.
Compressors with three-phase electric motor are equipped with remote pressure
switch (Fig.5), i.e. the overload cutout into the remote pressure switch operates to
protect the motor, and stops the compressor in case of motor overload by turning
automatically the starter switch to position (0). In that case, cut off power and manually
reset the thermal relay inside the electric box (Fig.6A).
If you restart the compressor and the device releases again, turn the main switch to
position "0" OFF, and contact any Authorized Service Centre tor correct relay setting
and, if necessary, for any adjustments.
• Exhaust solenoid valve: when the power is cut off, the solenoid valve opens and
releases all the air in the head of the compressor unit and in the delivery hose.
2.4 Standard accessories supplied (Fig. 3)
The following accessories are supplied together with the compressor:
a. Operation and Service Manual + information table,
b. anti-vibrating feet,
3. SAFETY GENERAL WARNINGS
3.1 General information
• Your compressor was thought, manufactured and arranged tor being
used as a compressed air source solely, according to the safety
instructions described hereunder.
• Several pneumatic accessories can be connected to your compressor.
For a proper use, refer to their single user's manual.
• Before operating your compressor or performing any operation read this Manual
very carefully.
• Any change, tampering or different use from what reported in the instruction
manuaI is forbidden. The Manufacturer assumes no responsibility tor any damages
resulting from improper use or noncompliance with the instructions described in
this manual.
• Before carrying out any service operation to your compressor, ensure the power
has been cut off by turning off the main switch and the wall switch (when supplied).
3.2 What YOU MUST DO:
Check that mains voltage is the same as voltage written on the EC plate.
Learn how to stop the compressor suddenly
and how to use all controls.
Before carrying out any service operation
the compressor tank must be
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36821 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info