593922
17
Zoom out
Zoom in
Previous page
1/32
Next page
15
5. FIRST USE
1. After having removed the compressor from the packing, check that no parts
have been damaged during transport.
2. The packing material has to be disposed of in compliance with the regulation
in force in the country where the compressor is being erected or recycled or
reused.
3. Install the compressor on a flat surface, in a suitably sized room, well
ventilated and not wet, where the temperature is not likely to rise above 34
°C. If there is not enough air ventilation, install a suitably sized exhauster or
fan.
ATTENTION: compressor out of oil!
This is to prevent oil from going into the compression chamber during transport,
owing to accidental overturning and thus damaging its functioning.
Before use fill up with oil.
Remove the rubber plug on the intake pipe, remove the air intake filter and the
spout from the plastic bag and screw the spout on the supplied oil bottle. Now
add the oil through the aspiration pipe (for model 36515) or the aspiration hole
(for model 36517) (Fig. 1) until reaching optimum level, as indicated on the data
label and visible through the oil level glass.
OIL MUST NEVER BE OVER THE MAX. OIL LEVEL.
To guarantee an optimal performance it is suggested to use Airpress
compressoroil with excellent resistance to alternate thermal conditions
and oxydation. DO NOT MIX DIFFERENT TYPES OF OIL.
Keep any oil remaining in the bottle for future topping up. Now insert the intake
filter on the pipe (or in the hole) with the pressure of your hand. After having
added the oil, never overturn or excessively tilt the compressor as this would
cause the oil run out. The power supply voltage must be the same as indicated
on the data label: 230 V/50 Hz and the socket must be 2 pole+ground type.
Fig. 1
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36515 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36515 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info