593921
22
Zoom out
Zoom in
Previous page
1/40
Next page
20
a) the motor has an automatic resetting thermal protection, that stops the
compressor when the temperature is too high. The compressor will start
again automatically after 15/20 minutes.
6. Air leaks:
a) can be due to bad seal of any connection, check all connections wetting with
suds.
7. Leak from the valve placed under the pressure switch:
a) damaged valve, replace it.
b) the defect can be due to an imperfect valve seal (see point 1. e).
8. The compressor starts when no air is being tapped:
a) air leak (see point 6).
9. The compressor starts and stops more frequently than usual:
a) large amount of condensate in air tank; remove condensate.
b) air leak (see point 6).
10. The compressor does not switch on when pressure is under the
minimum level and/or does not switch off at max. pressure:
a) defective pressure switch, replace.
11. The compressor gets very hot and/or uses a lot of oil:
a) oil level incorrect (see point 1. c).
b) wrong oil has been filled in the compressor. Use oil recommended by the
manufacturer only.
c) air leak (see point 6).
d) clogged intake filter: clean or replace.
e) too high outside temperature: do not close the unit in a cupboard unless
adequately ventilated. The compressor should be placed in the coolest
possible place.
f) over-running; ensure the compressor is the correct model for your work load.
SCRAPPING THE UNIT
If the machine is to be scrapped, it must be dismantled into parts of the same
material, to be disposed of according to the local regulations in force.
Always respect the regulations in force for disposing of old oil and other polluting
materials such as rubber, plastic, etc.
SPARES
Defective parts must be replaced only by authorized personnel; all possible
safety regulations must be observed in order to avoid any damage to people or
things.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36514 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36514 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info