Manual Airpress 36509 (page 28 of 52) (English, German, Dutch, French)

593929

Zoom out

Zoom in

1/52

are factors which cannot be built into this product, but must be supplied by the

operator.

 Only those persons who are aware of how to use the compressor by having read

this manual, should use the machine. Injudicious use may cause danger.

Danger plates (see page 42)

The plates fitted on the compressor unit are part of the machine; they have been

applied for safety purposes and must not be removed or spoiled for any reason.

3.0 PLACING

The AIRPRESS compressor should be placed in such way that all points, destined

to carry it will really do so. Take also care of a horizontal position.

The engine should get sufficient cooling air; so never cover the ventilating openings.

Place the compressor in cool dust free and well-ventilated surroundings with

clean air. Never place the compressor in a room where will be sprayed or in an

environment with aggressive substances in the air. Good ventilation is essential

to discharge the cooling air. Mind that the drain tap for condensation water (16), the

oil drain tap (17) and the oil level glass (8) will always remain attainable. We suggest

to leave a space of approximately 50 cm for ventilation and maintenance.

The temperature in the compressor room must not be lower than +5°C or higher

than +40°C.

Notice: Insufficient air supply, too high temperature and fouling of the air filter

reduce the efficiency of the compressor considerably.

3.1 ELECTRIC CONNECTION

At the factory the machine is already fully equipped with cables. The machine now

has to be connected to your own electricity supply. Connect the machine to a

separate group. Beware that voltage and amperage of your electric circuit meet the

needs of the motor. Use only cables with the right diameter. The factory suggests to

use cables of at least 2.5 qmm (for motors over 10 HP: 4 qmm).

It is well advised to place a main switch between the compressor installation and the

electric circuit, so you can shut off all the electricity before maintenance. Use only

skilled personnel for electric connections.

Before first use first read chapters 3.2 and 4.0.

3.2 AIR CONNECTION

Best use for connection of the compressor to an air circuit a flexible hose, to isolate

fibrations from the machine. The diameter of the hose must meet the connection of

the ball cock.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36509 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress 36509 Manual

Product: