Manual Airpress 36050 - ACR 10 (page 20 of 36) (English, German, Dutch, French)

594071

Zoom out

Zoom in

1/36

Change of the activated charcoal filter:

unscrew the lid. Remove filters carefully

from the chamber. Clean inlet and filter chamber, insert new filters. Screw the lid

back on. The devise is ready for operation again.

Attention:

fill the filterroom up with clean water untill water runs out of the water

outlet! Press the filter down! The filter should be completely under water!

Note:

we recommend to put the charcoal filter several hours in clean water before

it is placed into the filterroom of the separator. By watering the charcoal filter air is

being removed out of the capilars of the charcoal and therefore the filter is

immediately activ!

Checking of the discharging water:

(see also “Test and service”) a test sample

can be taken from the test valve. The water must be clean and clear. If the water is

turbid the activated coal filter has to be exchanged!

Disposal:

the waste oil and the saturated activated coal filter have to be disposed

of according to the regulations. Please get in contact with a disposal company in

your area.

5.0 TECHNICAL INFORMATION

From time to time problems occur which require a more detailed knowledge of the

devise. Here is some information and rules which can help you!

Influence of the compressor oil on the efficiency:

In the past compressor oils were only chosen to suit the compressor. The problem

of the condensate disposal was hardly considered or completely neglected. This is

one reason why many companies still use compressor oils which emulsify strongly

with water and some of which form a stable emulsion.

The condensate is turbid and remains so even after a fairly long setting time. In

certain conditions it even builds up a solid foam, which swims on the water surface

and prevents the function of the separator (outlet and coal choke up).

Such condensate cannot be separated by the ACR separator. The same

applies to other separators which operate on the same principle.

When it is unused, the activated coal filter absorbs some of the oil from the

emulsion but it is quickly saturated and thus ineffective. The coal chokes up, the

condensate level rises and the condensate flows out through the oil outlet.

Therefore, these emulsions have to be collected and properly disposed of.

Important:

In order to prevent the condensate from emulsifying a non-emulsifying compressor

oil has to be used. These oils are being offered by almost every oil producer.

Please contact your compressor and oil producer for more information on the type

of oil to be used.

Non-emulsifying compressor oils can be separated from water by the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36050 - ACR 10 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress 36050 - ACR 10 Manual

Product: