593925

Airpress 34250 - 600 plus Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
15
■ Compressed air is an energy fluid and therefore potentially dangereous. The
pipes carrying compressed air must be suitable fixed especially rubber hoses;
if not property fixed they can cause damage or hurt somebody. Do not pull
rubber hoses to try and move the compressor.
■ Do not weld or make any modifications whatsoever to the tank. If you find
some defects, air leak or corrosion the unit must be returned to the Service
Centres for a replacement to be fitted.
■ Never aim compressed air towards people or towards your body and
remember that the use of protective glasses is necessary for protecting the
eyes from dust and other particles moved by compressed air.
■ The use of compressed air in its applications (tyre inflation, pneumatic tools,
spray painting, washing, detergent washing etc.) must comply with the
relevant regulations for the individual cases guaranteeing the minimum
distance of 4 meters between the working area and the compressor.
■ Compressed air from a compressor can not be used for pharmaceutical, food
or health uses without further treatment. Do not use the compressed air to fill
the cylinders for breathing/diving apparatus.
5. START UP AND USE
- Connect the flexible hose to an external air receiver of suitable capacity for
the size of compressor and to reduce air consumption.Check the information
on the data plate with the specifications of the installation (voltage can
fluctuate by +/-10%).
- Check the oil level on the sight glass and if low refill through the oil filler. If
the oil level is below the minimum allowed, damage can occur to the pump, if
it exceeds the maximum oil is passed into the air supply.
- Turning the machine on and off must be done by using switch positioned on
the frontal panel, failure to do this would damage the compressor.
- The motor is supplied with thermal overload protection, this is placed in the
terminal box of the motor. They have manual reset, set when the machine
are tested, the setting must not be changed. A red warning light will show
that the protection must be re-set.
- When the machine is first installed and on each subsequent electrical
installation, it will be necessary to check the direction of rotation of the motor
and check the air inlet and outlet.
- Position the compressor at least 50 cm away from the wall and with good
ventilation around it, so that cool, clean air flows through the fly-wheels and
around the motor. If the compressor is located in a small room, it is
recommended to duet air from outside. It is important for the cabinet to be
closed for proper ventilation of the machine. On the two-stage compressors
the air compressed during the first stage at 4 bar pressure is cooled through
an intercooler into the final stage. For correct lubrication install the machine
on a level surface.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 34250 - 600 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 34250 - 600 plus in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info