475088
11
Zoom out
Zoom in
Previous page
1/73
Next page
AIRIS POWER SERVER
User Manual Rev 1.0
11
Quick Installation
This chapter will give you brief instructions on how to install the product. In
section 2.1, we will configure the hardware part ofAIRIS Power Serverstep by
step. In section 2.2, we will check whether the IP address of your PC is
assigned by DHCP. Once we complete the installation of theAIRIS Power
Serverhardware and checked your PC settings, we will use the web-based
management to configure theAIRIS Power Serverto suit your network
environment. In section 2.3, and 2.4, we will review all the software settings.
We will configure it to gain access to the Internet. If you need additional help
or advanced setting details, please refer to the remaining chapters.
Hardware Installation
Please follow the steps below to install hardware:
1. Get the included Ethernet cable.
Connect one end of it to the ADSL/Cable modem and the other end
to the WAN port on the SA.
2. Get another Ethernet cable.
Connect one end of it to the PC or hub and the other end to one of
the LAN ports on the SA.
3. Turn the ADSL/Cable modem on. Note: Cable modem users MUST
disconnect the cable modem from the wall outlet for at least 2
minutes before turning it on again.
If there are more PCs or hubs to be connected, please repeat step
2.
4. Connect the included power adapter to the power socket on
theAIRIS Power Serverand then plug the power adapter into a wall
outlet.
5. Turn on the SA.
If the link LED of the WAN port is not ON, switch the WAN
MDI/MDIX switch to the alternate setting.
The hardware installation is now complete.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airis SRV200 POWER SERVER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airis SRV200 POWER SERVER in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info