the fragrances in pleasantly small doses into the air. The advantage:
You don’t become accustomed to the fragrances and can therefore still
smell them all the time.
9. If you are disturbed by the brightness of the LEDs or by the illuminated
mist (in the bedroom for example), you can reduce the brightness of all
LEDs by pressing the dimmer button (12). You can choose between three
different modes:
•Normal mode (switched on as standard)
•Dimmed mode (press once)
•Light-off mode (press twice)
You can return to normal mode by re-pressing the dimmer button (12).
10. The moving mist output can be activated by pressing the swing mode
button (13) on the back of the device. The mist now swings at an angle
of approx. 160° to ensure optimum distribution of fragrance in the room.
11. Always switch the device off before you top up the water or fragrances
(8). If the device is operated at the second output level, you have to press
twice and once at the first output level for the device to be switched
off (the LEDs are no longer lit up). Then pull out the network adapter
(1). Remove the upper part (3) and the lid (4) and top the water up to the
maximum mark (6).
Note: If you would like to change the fragrance, empty Julia completely and
clean the water container (5) with a damp cloth. Fill Julia once again and
pour the drops into the device following the instructions.
Cleaning
Before maintenance and after every use, switch the device off and pull the
network adapter (1) out of the socket. Before you clean Julia, the network
adapter must be unplugged.
Careful: Never immerse the device in water (danger of short circuit).
• To clean the outside, rub with a damp cloth and then dry thoroughly.
• Internal cleaning: You can clean the ultrasound membrane (7) with a con-
ventional household descaler. Please do not try to scratch off deposits
from the membrane with a hard object. For stubborn deposits, we recom-
mend that you descale the device several times in a row. Rinse the water
container (5) after descaling and then dry it thoroughly.
Repairs
• Repairs to electrical appliances must only be carried out by a qualified
electrical technician. If improper repairs are carried out, the warranty
lapses and all liability is refused.
• Never operate the appliance if the adaptor or plug is damaged, after it has
malfunctioned, if it has been dropped or has been damaged in any other
way (cracks/breaks in the casing).
• Do not push any object into the appliance.
• If the appliance is beyond repair, make it unusable immediately by cutting
through the cable and hand it in at the collection point provided for the
purpose.
