Manual Air and Me Evel (page 7 of 23) (English, German, Dutch, French, Polish, Finnish)

807097

Zoom out

Zoom in

1/23

1. Plug the appliance.

• All luminous indicators of the control panel light for 1 second and then turn off.

• At the same time, the appliance produces 3 sound signals.

• When the appliance operational, the “Power” luminous indicator turns red.

2. Press the ON/OFF button ( A) to turn the appliance on. The movable ap opens.

3. Press the ON/OFF button (A) again to turn the appliance off.

• The “Power” luminous indicator turns red and the other luminous indicators turn off.

• The appliance continues to ventilate the air during 4 minutes after being turned off, then

the movable ap comes back to its initial position and the appliance stops completely.

Useful: the appliance retains the last settings from one use to another.

OPERATING INSTRUCTIONS

MAIN FUNCTIONS

D “SPEED” BUTTON: By pressing this button several times, you can adjust the air flow produced

by the appliance, selecting one of the three modes: LOW (low air flow), MED (medium air

flow) or HIGH (strong air flow).

E “TIMER” BUTTON: By pressing this button several times, you can select the operating time: 2

hours, 4 hours or 8 hours. By pressing it one more time, you can cancel the Timer function and

choose to let the appliance work continuously.

F “HUMIDITY” BUTTON: By pressing this button several times, you can choose the humidity rate

between three options: HygroSmart®, 60 % or 70 %.

• The HygroSmart® function ( G) enables you to maintain an ideal humidity rate in the air

(between 40% and 60%). The indicator light flashes if the humidity level in the ambient air is

already below 40%.

• Adjust the appliance on 60% if you want to use it in a cellar.

• Adjust the appliance on 70% if you want to use it in a wine cellar.

When the ambient air humidity is lower than the set humidity level, the appliance stops

dehumidifying, but its fan continues to operate. If the ambient humidity is higher than the

sethumidity level, the appliance automatically restarts dehumidifying.

It is possible to combine these three modes at the same time: choice of speed, choice of

dehumidification time and choice of humidity rate.

H “CLOTHES DRYER” BUTTON: By pressing this button, the appliance works at maximum speed.

It is possible to adjust the Timer and to define the desired humidity rate but it is not possible

to adjust the speed.

If you do not adjust the Timer, the appliance will work for 10 consecutive hours, will stop half

an hour to avoid overheating and then will automatically restart.

I “MOVABLE FLAP” BUTTON: Thanks to this button, you can control the switching on and the

stop of the movable flap. By pressing this button, the flap opens automatically. You can

adjust the opening angle of the flap by pressing it a second time. The movable flap can be

opened up to an angle of 90°.

1 Handle

2 Digital display

3 Air outlet

4 Continuous drainage hole

5 Water tank lid

6 Float

COMPONENTS (SEE PAGE 2)

7 Water tank

8 Filling the tank indicator

9 Removable lter

10 Air inlet

11 Built-in hygrometer

12 Electric cable

DIGITAL DISPLAY (SEE PAGE 3)

A ON/OFF button

B “In process” luminous indicator

C “Full tank” luminous indicator

D “Speed” button

E “Timer” button

F “Humidity” button

G “HygroSmart®” luminous indicator

H “Clothes dryer” button

I “Movable ap” button

EMPTYING THE TANK (SEE PAGE 3)

The appliance automatically stops working once the tank is full and the “Full” indicator ( C) lights.

If you had set the Timer, the appliance retains the remaining operating time. After having emptied

the tank, the appliance resumes the current program.

1 Turn the appliance off and pull the tank.

2 Unclip the water tank lid.

3 Empty the condensates.

4 Replace the tank lid and then replace the tank. Then, press the ON/OFF button and choose

the desired operating mode.

The dehumidifier is equipped with a tank positioning sensor. As a matter of security, the product

turns off if the tank is missing or not properly placed and the “Power” and “Full” indicators light.

USE PRECAUTIONS

• Make sure that the product is placed on a dry flat surface.

• Leave at least 50cm behind, around and in front of the appliance.

• Make sure the removable filter and the tank are properly positioned and pushed in.

• Do not remove the float from the tank because it will prevent the appliance from starting.

12 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Air and Me Evel in the language / languages: English, German, Dutch, French, Polish, Finnish as an attachment in your email.

The manual is 0.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Air and Me Evel Manual

Product: