807101

Air and Me Buldair Manual

7
Zoom out
Zoom in
Previous page
1/23
Next page
12 13
1 Air is drawn in through the openings underneath the unit.
2 The air is puried by E11 ltration which stops up to 99.97% of particles with a diameter
greater than or equal to 0.3 μm.
3 Odours are eliminated by the activated carbon on the lter.
4 The puried air is then distributed from the top of the unit, thanks to the fan.
OPERATION PRINCIPLE
1 Cover
2 Puried air outlet
3 ON/OFF button
4 Indicator light
5 Power supply
6 Container + cotton for the diffusion of
essential oils
7 Filter E11 + activated carbon
8 Body of the device
9 Air inlets
10 Ionizer
11 Fan
COMPONENTS (SEE PAGE 2)
USE PRECAUTIONS
1. Connect the device to the electrical outlet or via USB.
2. Press the ON/OFF ( 3) button to turn the unit on.
3. Press the ON/OFF button again to turn off the LED pilot light.
4. Press a third time to turn Buldair off.
OPERATING INSTRUCTIONS
• Make sure that the product is placed on a dry flat surface.
• Leave at least 50cm behind, around and in front of the appliance.
• Make sure that the filter and cover are correctly positioned and pushed in.
• Never operate the appliance without filter!
NEGATIVE IONIZATION
AROMATHERAPY
Negative air ionization improves air quality and helps prevent stress and anxiety. Thanks to this
function, Lendou emits between 3 and 8 million negative ions per second, which effectively
regenerates the air of a room. The diffused negative ions are subject to an electrostatic
phenomenon: they are attracted by the particles suspended in the air and are fixed on them,
then dropped to the ground. So, the air is purified.
Buldair has an aromatherapy function.
1 Make sure the unit is disconnected, then remove the cover from the unit.
2 Remove the cotton from the polypropylene receptacle.
3 Apply 3 to 10 drops of essential oil to the cotton.
4 Replace the cover. Reconnect and turn the unit on again.
• Make sure the unit is turned off and unplugged before any manipulation.
• Do not immerse the device in water or any other liquid.
• Do not use corrosive, abrasive or ammable products to clean the unit.
• The particulate lter is not washable and needs to be replaced.
CLEANING THE DEVICE
Clean the device with a soft, damp cloth.
FILTER REPLACEMENT
The life of the lter depends on the frequency of use of the device and the concentration of
pollutants in the air. It should be replaced about every 6 months.
1 Make sure the unit is unplugged, then remove the unit cover and lter.
2 Place the used lter directly in a bag and throw it quickly to avoid dispersing contaminants.
3 Install the new lter,
4 Replace the cover. Replug and turn the unit on again.
Avoid used lters being handled by people with asthma or allergies. Remember to wash your
hands after handling a used lter.
STORAGE OF THE DEVICE
If you don’t use your air purier, you can store it in a clean place, away from moisture and heat.
MAINTENANCE AND FILTER REPLACEMENT (SEE PAGE 3)
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Air and Me Buldair at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Air and Me Buldair in the language / languages: English, German, Dutch, French, Polish, Finnish as an attachment in your email.

The manual is 0.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info