Manual Aiptek HyperPen 10000U (page 9 of 68) (English, German, French, Italian, Portuguese, Spanish, Norwegian, Finnish)

496122

Zoom out

Zoom in

1/68

4. Hot Cell Tab

a. Hot Edges

Hot edges show the possibilities of allocating hot cells. The

hot cells of HyperPen 10000U are allocated only in the

upper side of the tablet.

b. Hot Pad Layout

You can change the default setting of hot cells by selecting

any of 16 hot cells.

If you want to redefine the hot cells, click ‘Define’. Then key

in the program or function, route of where the program is

saved, and parameters if necessary. The string typed will

be passed to the program as parameters. Click ‘OK’ to

confirm the reset.

If you want to get an overview of all hot cells, click ‘Print’.

Notice: There’s no Print Key in Mac System.

If you want to clear the initial setting, click ‘Clear’

5. Pressure Tab

The pen pressure can be adjusted the indicator between

‘Light’ and ‘Heavy’. Draw on the ‘Pressure Test’ area to see

the thickness of handwriting under the selected pressure.

Step 4: Verifying installation for hardware and driver functions

Use the tips here to verify the tablet function:

1. As soon as the pen tablet itself activates, the LED begins to flash.

2. Tap on any surface with the pen tip to “wake it up” if it has gone into standby

mode. When the pen is not used for some time, a built-in power saving function

makes the pen or mouse enter into standby mode.

3. Press a button on the pen barrel. The LED will light up.

4. Hover or move the pen in the working area, the cursor on the screen should move

accordingly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiptek HyperPen 10000U in the language / languages: English, German, French, Italian, Portuguese, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiptek HyperPen 10000U Manual

Product: