575584
15
Zoom out
Zoom in
Previous page
1/29
Next page
Solo-SoloDL
User Manual
Release 1.00
14
www.aim-sportline.com
Chapter 5 Solo configuration
You will need to use AiM software Race Studio 2 to configure the track beacon positions
and to define the ECU of your car (this for SOLO DL only).
Any other parameter will need to be configured by the keyboard.
To enter configuration press “MENU”.
5.1 Lap timing modes
Solo can manage different race modes: Speed, Regularity and Performance. In all
situations, it gives the proper time information.
To set the type of race, follow this path: MENU>>RACE MODE SETUP. Available
options are Speed, Regular, Performance.
5.1.1 Speed
This is the usual race or test: you have to drive at the maximum possible speed. The lap
time is rolling until the vehicle passes in front of the finish line, where it stops for a couple
of seconds.
5.1.2 Regularity
The rule of regularity races is as follows
the lap time stored after the second passage from starting/finish line becomes the
reference lap;
the following laps have to be driven in the same lap time or as close as the
reference lap.
5.1.3 Performance tests in detail
In case of Performance tests, the Start Line is triggered at the increment of Speed, while
the Finish line depends upon the selected length of test: you can choose among:
1/4 miles;
1/8 miles;
0/100 m;
0/60 mph;
0/100 km/h.
Data recording and time computation start when Speed passes from ZEROto more than
10 km/h. When the set length is reached the display will freeze and then shows the
performance time and max speed.
5.2 Circuits: Closed and Open
5.1.1 Closed circuit
The most common circuit, of course, is the Closed Circuit, where a track where the lap
begins and finishes is at the same point.
5.1.2 Open circuit
If you configure Solo in order to manage open circuits, it stops the timer and shows the
Lap Time when your vehicle passes from the Finish Line. It will start recording again as
soon as it passes in front of the Starting Point.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AIM Sportline SOLO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AIM Sportline SOLO in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info