575585
21
Zoom out
Zoom in
Previous page
1/29
Next page
Solo-SoloDL
User Manual
Release 1.00
20
www.aim-sportline.com
Chapter 8 Use of Solo during the tests
How does SOLO work when I race
Solo behaves differently according to its settings.
First of all, we have to know that SOLO starts recording when the speed increases. So, if
the vehicle does not move, even with the engine ON, Solo does not do anything, you can
normally enter the Menu etc. When Speed reaches 20 km/h, SOLO changes mode and
starts recording all the parameters.
Also it may be useful to know that SOLO has a preliminary buffer, so it can really start
saving information ONE SECOND BEFORE the start of the race.
This can be extremely useful to analyse the very first instants of the race.
8.1 Closed circuit speed races
As we have already seen, there are three types of Lap time information that we can see:
Rolling Lap Time, that is shown by default
Steady lap Time, that appears for some seconds at the starting line
Predictive Lap Time, that is shown on Page 2 and that is evaluated after having
finished the first lap
With “>>>/<<<” buttons it switches from one page to the other, according to the number of
configured pages. At the end it shows the satellite page.
8.2 Closed circuit regularity races
As in Speed Races, Solo shows Rolling, Steady and Predictive lap time. The only
difference is that it calculates the Predictive Lap Time referred to the speed of the Second
Lap and shows the Predictive time difference between the Second lap and the Actual one.
At the Pit Stop, the vehicle….stops and, generally, SOLO is turned off. Nevertheless, it
goes on evaluating the time and does not interrupt the recorded test, so, when the vehicle
starts racing again, the lap time and lap number are not reset.
With “>>>/<<<” buttons it switches from one page to the other, according to the number of
configured pages. At the end it shows the satellite page.
8.3 Open circuit speed races
Races in open circuit have a starting and a finishing point. Both points are stored in the
tracks database. The display shows rolling lap time. At the end of the race, when the car
crosses the finish line, the time becomes Steady.
8.4 Performance tests
The vehicle places at the starting point, the car starts. That is it!
On the dash you can see the rolling time that becomes Steady Time as soon as the
Performance finishes, so, after ¼ of mile, or ½ mile, or when it gets 100 km/h etc.
Maximum speed is shown also.
Data recorded are, of course, speed every 1/10 of second, acceleration, time and, if you
have a SoloDL, all the information coming from ECU. Very simple, very easy.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AIM Sportline SOLO DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AIM Sportline SOLO DL in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info