Manual Aidapt VP187D (page 3 of 5) (English)

779099

Zoom out

Zoom in

1/5

5. Insert the handle assemblies into the

uppermost tubes until the locking pins

click in place, in the same manner as

the legs (Figure 6). Note: ensure the

brake cable lies on the outside of the

frame, this will reduce the risk of

interference or entrapment.

6. Use the brake cable clips to clip the

cable to the main upright of the

rollator (Figure 7).

7. Rotate the rollator and lie it

on its back (Figure 8), this will

make the front wheel

assembly easier. Insert the

front legs until the locking

pins click into place (Figure

9). Ensure the leg is the

correct orientation; with the

rollator on its back the castor should

settle relatively horizontally. If you

have fitted the legs on the wrong

side, the castor will look as though it

is ‘pointing upwards’.

8. To fit the back rest, turn the locking

key to the vertical OPEN position on

both sides of the back rest (Figure

10). Align the groove on the locking

pin assembly to the track on the

plastic connector on the frame

(Figure 11) ensuring the locking pin

text faces outwards. Slide the

assembly vertically downwards until

it comes to a stop (Figure 12). Lock by

rotating the locking pin 180° to the

LOCK position (Figure 13). Repeat for

the opposite side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aidapt VP187D in the language / languages: English as an attachment in your email.

The manual is 0.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aidapt VP187D Manual

Product: