Manual Aidapt VP176 (page 3 of 24) (English)

642791

Zoom out

Zoom in

1/24

Usage and Maintenance Instructions Ver.3 09/2013 (2634)

2. Extend the rollator fully , and check that the side bars are straight and level.

Carefully insert the brake assembly with pre-punched extension tube (Fig. 3) within

the frame.

3. At the required height (there are several holes) insert the fixing screw through the

hexagonal hole in the frame, and pass through the hole in the handlebar tube,

place the curved plastic washer over the end of the screw, with the curved side

facing the tube. Fix the screw in place with the locking handwheel (Fig. 3b).

4. Make sure that the handwheel is tightened sufficiently so that the brake tubes will

not move accidentally.

5. After setting the height, check that both brakes are even in height and that the

rollator is sitting even onto the ground.

6. Fix the brake cables into the integral brake cable ‘U’ clip welded onto the frame if

not already assembled (Fig. 3a).

7. Prior to use make sure brakes are adjusted correctly and working properly. See

section ‘OPERATING THE BRAKES’ and ‘ADJUSTMENT’.

Fig. 3 Fig. 3a

Fig. 3b

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aidapt VP176 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aidapt VP176 Manual

Product: