Fitting and Maintenance Instructions Ver. 2 08/2012 (2270)
3
BEFORE USE
• Carefully remove all packaging. Avoid using any knives or other sharp instruments
as this may damage the product.
• Check the product for any visible damage. If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
• Please read these operating instructions carefully before you operate the lock or try
to change the combination of numbers.
NB. The Key Safe is delivered without a code – you need to save your chosen code the
first time you use it.
HOW TO OPEN THE KEY SAFE FOR THE FIRST TIME
• Push the CLEAR button down
• Push the OPEN button down
• You can now open the cover
HOW TO SAVE A NEW CODE
• Choose your code (minimum 3 digits). We recommend using a 4 digit, non-
concurrent code with no repeated numbers, e.g. 4827 rather than 4485 or 8787.
• Remove the back panel (#14) of the cover by removing the screw (#15) with a
screwdriver.
• Set your chosen code by turning the corresponding plastic screw (#7) behind the
number by 180o so that the arrow on the screw (#7) points down. Repeat for each
digit in your chosen code.
• You have now saved the code and the back panel can be replaced onto the cover.
HOW TO OPEN OR CLOSE THE SAFE
• Push the CLEAR button down
• Type the code in
• Push the OPEN button down
• You can now open/remove the cover or replace it to close the Safe
CARE & MAINTENANCE
Please make a check of the product at regular intervals or if you have any concerns.