Manual Ahrend 500 (page 36 of 74) (English, German, Dutch, French, Spanish)

554590

Zoom out

Zoom in

1/74

Interiors

Cabinets are usually supplied with apredetermined inte-

rior lay-out specifically ordered for the workstation.

Pull-out drawer

In a 33 cm deep pull-out drawer (fig. 3) you can use the

same accessories as in A6/A7 drawers in drawer

pedestals (see page 9).

Shelves for lateral suspension files

The shelves for suspension files have extra ridges under

the front and back edges from which you can hang lat-

eral suspension files (fig. 4). You can hang them at any

height in the cabinet you wish.

Suspension file frames

The cabinet is supplied with the suspension file frames

(fig. 5) mounted such that you can hang A4 suspension

files in them. You may,however,have them fitted at any

height you require in the cabinet. If apull-out frame

slides forward on its own, it means that the cabinet is

not level and must be readjusted (see page 10).

Safety

When one suspension file frame is pulled out, you will

not be able to pull out any of the other frames. They are

blocked to prevent the cabinet from tipping over.

Twopull-out frames and drawers may be opened

at the same time. Be awareof the risk of tipping if the

drawers areheavily loaded.

When the position of pull-out frames and drawers

in the cabinet is changed, the locking pawls on the anti-

tilt bar willalso have to be moved for safety reasons.

This has to be done by a specialist fitter.

After delivery

Cabinets are delivered withpull-

out frames, trays and drawers

blocked. The anti-tilt bar has to be

pushed down so that they can be

pulled out for the first time -on the

right side only in the case of 80 cm

wide cabinets and on both sides on

120 cm wide cabinets.

Transport clamps may be removed

once the cabinet has been installed.

Adjusting the shelves

Shelves can be placed at any height

in the cabinet. To adjust the height,

open the cabinet fully,lift the shelf

at an angle and pull it towards you

out of the cabinet.

Twist the shelf supports out of the

slots (1,2) and reposition them at

the height you require (3,4).

Make sure that they are at the same

height at the front and back and on

both sides. Use the round holes next

to the slots as points of reference.

Tilt the shelf at an angle again,

return it to the cabinet and place

it on the two supports.

English

050099Ahen500 19-10-2005 15:20 Pagina 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ahrend 500 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ahrend 500 Manual

Product: