554590

Ahrend 500 Manual

31
Zoom out
Zoom in
Previous page
1/74
Next page
1 2
30
The user and the wiring
Users may themselves sometimes want to change some
aspect of the wiring of their Ahrend500 workstation.
For example plug an item of equipment intoa socket or
unplug it, or conceal surplus lengths of cable tidily.
Safety
Safety must be the prime concern in the wiring of
a workstation.For this reason,every component that
comes into contact with wires and cables has rounded
edges and theitem of furniture can be earthed as a
whole.
Accidents caused by tripping over cables and flexes on
the floor can be prevented by concealing the cables in
the facilities specifically provided by the Ahrend 500
range.
Concealed cables make the workstation safer,it looks
much tidier and it is easier to clean.
Connections
Your workstation can be fitted with connections to the
power supply and to computer networks in a variety of
ways:
–Sockets can be mounted directly on the support beam
(fig. 1).
–One or more cable dumps can be suspended under the
workstation (fig. 2). In that case, the workstation
hardware is plugged into sockets in these dumps, and
you can also conceal excess cable in them.
In bench models, sockets that allow equipment brought
by the user, such as laptops and mobile phone chargers,
to be connected to the mains and/or a communication
network can be mounted in the central organiser zone
(fig.5). Flexi-panels are cut away at the bottom to pro-
vide room for these sockets (fig.6).
Be very careful to keep fluids (drinks, water from plant
pots) away from these built-in sockets!
Workstation with socket on
cable clamps
It is easy to plug in and unplug
equipment.
Surplus lengths of cable can be
bundled between cable clamps.
Surplus lengths of cable can also
be suspended in the hooks of work
surface guides.
Flexi-panel
You may need to move the panel
slightly to allow the plug to be
inserted or removed.
English
5
6
050099Ahen500 19-10-2005 15:20 Pagina 0
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ahrend 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ahrend 500 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info