639224

Ahlborn PRAELUDIUM IV-E Manual

9
Zoom out
Zoom in
Previous page
1/86
Next page
AHLBORN Classical Organs
English Page 5
PRAELUDIUM III - PRAELUDIUM IV/E - User's Manual
INTRODUCTION
•
NOTE: Before every performance, make sure that the Crescendo is in the normal position (O)
This instrument offers 500 combinations with automatic return to hand-set registration. The corresponding controls
appear as THUMB PISTONS Manual I.
COMBINATION ACTION (SEQUENCE MODE)
F COMBINATION SET -/+ DECREMENTATION/INCREMENTATION
0 HAND-SET REGISTRATION 1 to 9, 0 NUMERICAL KEYS FOR DIRECT ADRESSING OF
COMBINATIONS
A.P. AUTOMATIC PEDAL PL.I,PL.II, PLENUM I, PLENUM II
T TUTTI A GENERAL CANCEL
THUMB PISTONS below Manual I (from left to right):
TO SET A COMBINATION:
TO MODIFY A STORED COMBINATION:
TO ERASE COMBINATIONS PARTIALLY OR TOTALLY:
3
Press and HOLD the F thumb piston and press the "0" numerical thumb piston. Release both keys. The combination is
now saved and will be indicated permanently.
2
Press and HOLD the F thumb piston and press numerical keys. For position greater than 9, press numerical keys fast
one after the other. Release the keys. The combination you have choosen is flashing in the display. At this point the
registration is not memorised yet.
1
Press the tabs of the desired registration.
4
Bring all tabs to zero, using the A thumb piston and repeat the operation on thumb pistons still available.
3
Press and HOLD the F thumb piston and press the "0" numerical thumb piston. The modification is done. Release both
pistons. The modified registration is now memorized. It is possible to effectuate a temporary change to the combination
by hand, without using the set control. In this case, if the same numbered thumb is pressed, the original registration
will be stored.
2
Add, cancel or change the stops required.
1
Call up a previously memorised combination. That operation is possible in 2 different ways :
a
Press numbered thumb pistons (i.e. 7 or 3-4 or 4-2-7) The numerical call up will be executed with a short delay.
b
Press - piston or + piston. Previous or next combination is called up without delay. In position General Memory = 0,
the - and + pistons have no effect. Actual memory will be indicated in the display.
3
Press and HOLD the 'F' thumb piston and press "0" numerical thumb piston. It's content is now erased, while the
contents of the other memories remain unchanged.
2
Press the 'A' piston, checking that no stops are activated.
1
Select the memory which contains the combination you wish to erase.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ahlborn PRAELUDIUM IV-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ahlborn PRAELUDIUM IV-E in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info