3148
39
Zoom out
Zoom in
Previous page
1/44
Next page
DOMINA C24E
39
4.3 Controle gasblok4.2 Controle van gasdrukken
4. Afstellingen en controles (2)
LET OP !
Sluit de meetnippels !
Gasdruk en gasverbruik voor het toestel. Het toestel kan
zijn afgesteld voor aardgas (G25) of voor propaan (G31).
De gasinspuiter en de gasdrukken, zoals gasvoordruk,
startdruk, minimumdruk zijn afhankelijk van de gassoort.
Zie tabel 4.1 voor de gasdrukken.
1.Meet de gasvoordruk (stand-by):
Zet de bedieningsschakelaar op "OFF";
Meet de gasvoordruk op punt 4 van het gasblok;
2.Meet de voordruk tijdens bedrijf.
Zet de bedieningsschakelaar op "ON";
Ontsteek het toestel middels tapwatervraag;
Meet de gasvoordruk op punt 4 van het gasblok.
De druk is lager dan de stand-by situatie.
3.Meet de ontsteekdruk;
Maak de ionisatiekabel los;
Start het toestel, e.v.t via X5 (101);
Meet de ontsteekdruk op punt 3 van het gasblok;
Maak de kabel weer vast;
Reset.
4.Meet de minimum druk;
Maak de connector X10 (101) los;
Start het toestel;
Meet de minimum druk op punt 3 van het gasblok;
Monteer connector X10 (101).
5.Meet de maximum druk;
Overbrug de testaansluiting X5 op de hoofdprint;
Zet de schakelaar op "ON";
Meet na 10 seconden direct de maximale gasdruk op
punt 3 van het gasblok.
Het gasblok wordt aangestuurd door de hulpprint via
connector X1 (zie figuur 4.2).
De hoofdgasklep (V1) wordt bediend door 10-11 (X1), en
de modulerende klep (V2) door 8-9 (X1).
De spoelen van de kleppen hebben de volgende elektri-
sche weerstanden:
V1 Hoofdgasklep 2450 - 3350 Ohm
V2 Modulerende klep 1450 - 1950 Ohm
Figuur 4.2 Aansluiting van het gasblok op de hulpprint.
Gasblok Hulpprint
GasdrukHulpprint
X1
Gasblok
VK41.5
Het gasblok wordt afhankelijk van de warmtevraag
elektrische aangestuurd zoals in de tabel 4.2.
De insteling van het tapwater- en cv-setpoint (op het
bedieningspaneel) kunnen het maximale modulatie
signaal beïnvloeden. Zet de setpoints tijdens de
meting maximaal.
Potmeter P3 (101) is een directe beperking van het
maximale cv-zijdige modulatie signaal. Zet deze
potmeter tijdens de meting maximaal.
Vergeet niet om na de meting het tapwater-, cv-setpoint
en potmeter P3 terug te zetten op de afstelling van voor
de meting.
Tabel 4.2 Stuurspanningen naar het gasblok
Gemeten wordt de gelijkspanning.
De maximale gasdruk wordt verkregen door het
overbruggen van X5 (101), potmeter P3 (100) moet
maximaal staan. De minimale gasdruk wordt verkregen
door tijdens het branden de X10 (101) los te nemen.
Meet tijdens de controle ook de gasdrukken, zie
hiervoor tabel 4.1.
100 Pa = 10,0 mmwk = 1,00 mbar
175 Pa = 17,5 mmwk = 1,75 mbar
Omrekenfactoren
voor druk
Druk
voordruk (rust) [mbar]
minimumdruk [mbar]
ontsteekdruk [mbar]
maximumdruk [mbar]
max. gasverbruik
Stand JP02
(101)
Aardgas (G25)
20 - 30
3,6
6,0
17,5
3,17m
3
/h
52,8 l/min
Propaan (G31)
36 - 50
8,3
13,0
36,5
2,0 kg/h
Tabel 4.1 Gasdrukken
maximum
minimum
Moduleer-
klep (V2)
Hoofdgas-
klep (V1)
8 - 9
10 - 11
20 V - 30 V
65 V - 95 V
50 V - 60 V
110 V - 140 V
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AGPO Domina service handboek at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AGPO Domina service handboek in the language / languages: Dutch as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AGPO Domina service handboek

AGPO Domina service handboek Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info