521798
35
Zoom out
Zoom in
Previous page
1/212
Next page
7
EN
4 Wait until the control lamp h and STATUS
are no longer flashing and STATUS is contin-
ually on. This means that the scanning process
is completed and the data was saved onto the
memory card.
Insert film / slides
Scanning documents with the protective cover
1 Verify that there are not any documents in the
document feed. Push the document guide
rightmost.
2 Place the film guide on the designated grooves
in the document feed.
3 Carefully slide the film guide all the way into
the document feed. Be careful not to damage
the metal rails in the film guide.
4 When the film guide is inserted correctly, it
snaps into place and the device starts the cal-
ibration process.
5 Wait until the control lamps are no longer
flashing.
6 Remove the negative film/slides from the pro-
tective case/bag.
7 Verify that they are in the correct position for
insertion.
8 Hold the negative film such that the labelling
(number) of the negative is legible (not re-
versed) and the upper side of the image is fac-
ing in the direction of the activation key.
9 Insert the negative film / slide into the film
guide.
10 Insert the negative film / slide into the film
guide far enough so that it is automatically fed
in and the scanning process starts. Be careful
not to bend the negative film / slide. The con-
trol lamp h flashes during the scanning proc-
ess.
11 Wait until the control lamp h and STATUS
are no longer flashing and STATUS is contin-
ually on. This means that the scanning process
is completed and the data was saved onto the
memory card.
12 Return the scanned negative film / slides to
the protective case / bag in order to avoid
damage or contamination.
13 The file name is assigned according to the DCF
(Design Rule for Camera File System) standard.
Notice
Removing documents from protective
cover
Remove the document from the pro-
tective cover after the scanning proc-
ess in order to avoid the document
sticking to the protective cover.
Notice
Suitable documents
• 35mm colour negative film
• Unframed slides
• 35mm black/white negative film
• Automatic rotating and mirroring of the
photo:
The scanner automatically recognises
the orientation of the negativ film when
the printed numbers on the edge are in
the same orientation as the photo. If the
numbering cannot be identified, this
function is deactivated.
CAUTION!
Unsuitable Documents!
No glue residue or stickers should be
present on the edge of the negative.
Only unframed slides can be inserted.
CAUTION!
Damaged negative film ends
If the negative film ends are damaged
(not cut evenly, folded), cut the film
evenly and removed the folded corners.
Notice
Handle the negative carefully
Handle the negative with care. If pos-
sible, wear cotton gloves.
Notice
Scanning speed
Due to the higher resolution when
scanning negatives / slides, the scan-
ning speed is slower than when scan-
ning photos.
as-1150-manual-03-uk-253354001-a.book Seite 7 Dienstag, 7. September 2010 2:33 14
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Agfa AS1150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Agfa AS1150 in the language / languages: English as an attachment in your email.

The manual is 30,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info