729482
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
BURNER RESET
OIL LEAK OR FAULT
POWER FAILURE
FUEL
VENTILATION
SERVICING
Fig. 14 DESN 515775
BOILER BURNER
RESET BUTTON
COOKER BURNER
RESET BUTTON
FAULT INDICATOR
Reset buttons are located behind burner door. The
cooker burner, under normal conditions will flash every 15
seconds. This is part of the system monitoring.
The boiler burner does not flash.
If a fault occurs on either burner then it automatically
shuts down and the red button on the burner control box
will be illuminated.
OPERATE BY PRESSING WITH FINGER ONLY.
Please wait at least 60 seconds between resetting the
lockout button.
If for example the storage tank has been replenished
after the oil supply tank ran out, and resetting the lockout
button does not light the burner immediately, it will be
necessary to repeat the sequence.
Continued lockouts indicate a burner or oil supply
malfunction. The fault should be diagnosed and rectified.
In the event of repeated failure switch off the oil and
electrical supply to the appliance and contact your
installer/service engineer.
If an oil leak or fault exists or is suspected the unit must be
isolated from the oil and electrical supply. The appliance
must not be used until the fault has been rectified.
In the event of power failure your appliance will become
inoperative. When the power is restored it will automatically
restart, if programmed or manually set to do so.
Please endeavour to see that when your fuel is being
delivered into your storage tank, that the appliance is left
off during delivery, and preferably for a period of 1 hour
afterwards to allow sediment within the tank to settle.
This is particularly important for the oil system using two
pipe flow and return.
Also endeavour to avoid running out of fuel, by seeing
that the storage tank is replenished in good time. This
will help avoid nuisance breakdowns which can result
through fuel starvation.
Please see that the permanent ventilation provided for
the safe and reliable operation of your Rayburn is never
blocked off.
With normal use a boiler/cooker annual flueway clean and
burner maintenance should be carried out immediately
before the end of the heating season.
An additional flueway clean halfway through the heating
season may be necessary in some cases - see servicing
instructions.
A HOT APPLIANCE CANNOT BE SERVICED.
Both cooker and boiler thermostats knobs should be
turned OFF, the night preceding the day of the servicing
so that the appliance will have cooled down by the
following morning.
This product MUST be serviced at regular 12 monthly
intervals to optimise its safety, efficiency and performance.
Should a problem arise with the cooker or boiler, an alarm
or an error code fault will be displayed, on the RH side for
the cooker and the LH side for the boiler.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aga Rayburn 760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aga Rayburn 760 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info