729481
11
Zoom out
Zoom in
Previous page
1/16
Next page
1. The display should alternate between OFF 2 and the time
of day currently set.
2. Adjust using + or - to set the time the second event is to end.
3. Press SET once to confirm.
4. Again, if this is not required set the time to 00:00 and then
press SET.
1. To repeat the first event of the previous day, press the
REPEAT button once.
2. To repeat the second event of the previous day. press the
REPEAT button once.
3. Alternatively, to set different times from the previous day,
alter the required time.
1. To set individual days, press SET once.
2. Adjust to the day required using + or - buttons.
3. Press SET to confirm the day chosen.
4. Adjust to the new times required as before.
5. Again, if an event is not needed set to 00:00.
6. Once day is set (both events), display should default to
time of day.
1. Press the TIMER button once.
2. 00.00 should be displayed.
3. Adjust to the time required using + or - buttons.
4. Press TIMER to confirm.
5. Press TIMER to show the time of day. To check the
remaining time on the minute minder, press TIMER
once then press TIMER again to show the time of day.
Once the timer has finished, it will flash
00:00 and a buzzer will sound. To stop press TIMER.
To return to MANUAL mode at any time whilst programming,
press the AUTO/MAN button and time of day will be
displayed.
11
REPEATING DAYS
Fig. 11
DESN 514720
SETTING THE PROGRAMMER - DAILY
Fig. 12
DESN 514721
SETTING THE MINUTE MINDER
Fig. 13
DESN 514722
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aga Rayburn 660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aga Rayburn 660 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info