729489

Aga Rayburn 212SFW Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
The firebricks fitted to the Rayburn 212SFW are of first
quality manufacture, and providing the cooker has been
installed and used correctly will have a reasonable life.
They are, however, expendable items and in time will
require renewal.
Replacement bricks either in sets or singly can be
obtained from your Rayburn distributor. Always quote the
manufacturing number.
The manufacturing number, which will be found on a data
plaque fixed to the appliance, should be quoted if any
questions arise in connection with this Rayburn Cooker.
Rayburn 212SFW
The cooker has been designed to provide a satisfactory
supply of domestic hot water with a normal day’s cooking,
providing the cooker is kept alight overnight and the
system, complete with lagged cylinder, conforms to the
installation instructions.
In some circumstances it may be possible to overheat the
appliance and the water inside will boil. This will be
evident by the sound of a knocking noise coming from the
appliance and pipes around the house. If this occurs close
off all air controls and manually start the central heating
pump if fitted. Opening the oven doors and hotplate
covers will help to release heat from the appliance. Be
aware that steam and boiling water will be expended from
any open vent from the heating system probably in the
roof space at the expansion tank.
In the unlikely event that the appliance is not operating in
freezing conditions the water must be drained from the
boiler to prevent frost damage.
Always use a qualified service/heating engineer when
servicing or maintenance is required. Use only authorised
replacement parts. Do not make unauthorised
modifications.
Properly installed and operated, this cooker will not emit
fumes.
Occasional fumes from de-ashing and re-fuelling may
occur but persistent fume emission must not be tolerated.
If fume emission does persist, then the following
immediate action should be taken:
1. Open doors and windows to ventilate room.
2. Let the fire out or remove lit fuel from cooker.
3. Check for flue or chimney blockage, and clean if
required.
4. Do not attempt to re-light the fire until cause of fumes
has been identified, and if necessary, seek
professional advice.
Spares List No
Part Number Description Required
Required
RS4F 3-51-2A L.H. Side Firebrick 1
RS4F52-7A Middle L.H. Side Firebrick 1
RS4F3-54-8B Top L.H. Side Firebrick 1
RS4F 3-48-4A Bottom R.H. Side Firebrick 1
RS4F 50-5A Top R.H. Side Firebrick 1
RS4F 3-47-3A Bottom Front Firebrick 1
RS1M 90040 Ashpan 1
RSFM 61 Operating Tool 1
Replacement parts if required are available from your
local stockists.
8
FIREBRICK REPLACEMENT
HOT WATER SERVICE
SERVICING
FUME EMISSION WARNING
SPARE PARTS
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aga Rayburn 212SFW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aga Rayburn 212SFW in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info