729419
12
Zoom out
Zoom in
Previous page
1/20
Next page
The following points are intended to help during the change-over from your previous cooker to
the AGA way of life. You will also find that the AGA Book and the AGA new user guide video
provide a very useful introduction to the cooker.
After the AGA has been installed
When first lit, the AGA will emit an odour for a short while. This is simply due to protective oil
burning off the hotplates. If you can wipe the inside of the hotplate whilst the AGA is heating up
it will avoid a film of this oil being deposited on the inside of the lids. Also, condensation may
occur on the top plate and front plate whilst the AGA is heating up. This should be wiped away
as soon as possible.
For most effective operation of the cooker the following points should be carefully observed:
1. Close the insulating covers whenever the hotplates are not in use.
2. Clean the hotplates regularly with the wire brush.
3. Utensils with ground flat bases must be used to make perfect contact with the hotplates.
4. Have the cooker serviced at regular intervals by your AGA distributor.
5. Take care, when closing the oven doors, to lift them on to the catch.
6. Try to cook as much as possible in the ovens, so that heat is conserved and cooking smells
and condensation are reduced.
The Roasting Oven can also be used for ‘grilling’ at the top and shallow ‘frying’ on the bottom.
Keep the insulated covers down when the hotplates are not in use so that the heat stored in the
cooker is conserved.
z For optimum cooking performance, use the AGA utensils and cast iron cookware. They
have thick ground bases which give the best contact with the hotplates.
z The AGA pans can be stacked in the Simmering Oven.This is especially useful for steaming
vegetables and simmering sauces.
z Store the Plain Shelf out of the AGA. Use it cold in the Roasting Oven to deflect the heat
from the top of the oven, creating a more moderate oven temperature. It can also be
used as a baking sheet.
z A guide to AGA cooking is given on page 14. Ask your AGA distributor for an invitation to
an AGA demonstration.
OPERATING THE AGA
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aga GC3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aga GC3 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info