672382
16
Zoom out
Zoom in
Previous page
1/82
Next page
12
PRODUCT DESCRIPTION
1.2 Preparing for the Installation
Due to the high power consumption, always use the plug
exclusively designed for this product. If an extended line is
required, please consult your service agent.
The product should be installed on a at surface to avoid tipping.
The distance between the back of the product and the wall should
be maintained for proper ventilation. Avoid installing the product in
the kitchen, bathroom or any other places with high humidity so as
not to shorten the service life of the electronic components.
The product can normally operate only under 5000m in altitude. In
installations at altitudes above 3000m, some abnormalities may be
experienced.
1.3 Installing and Removing Table Stands
(optional)
To install table stands:
1 Ensure your display is powered off.
2 Spread a protective sheet on a at surface.
3 Grab the carrying handles and place the display face-down
on the protective sheet.
4 After inserting the stand in the guide block, tighten the
screws on both sides of the display.
Carrying handle
Thumbscrews
Guide block
Table stand
Longer portions
face the front
To remove table stands:
1 Power off the display.
2 Spread a protective sheet on a at surface.
3 Grab the carrying handles and place the display face-down
on the protective sheet.
4 Remove screws using a screwdriver and place them in a
safe place for reuse.
Warning:
Do not press too hard on the
LCD panel or edge of the
frame, as this may cause the
device to malfunction.
During unpacking, make sure
to hold the carrying handles
to remove the device from its
packaging.
Note:
The longer side of the stand
should face the front of the
display.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ag neovo PD-42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ag neovo PD-42 in the language / languages: English as an attachment in your email.

The manual is 16,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info