672369
46
Zoom out
Zoom in
Previous page
1/50
Next page
43
APPENDIX
6.2 Troubleshooting
Problem Possible Cause and Solution
No picture.
LED indicator is OFF.
Check if the LCD display is turned ON.
Check if the power cord is properly connected to the LCD display.
Check if the power cord is plugged into the power outlet.
LED indicator is
AMBER.
Check if the computer is turned ON.
Check if the computer is in standby mode, move the mouse or press
any key to wake up the computer.
Image position is incorrect. Adjust the H. POSITION and V. POSITION values. See IMAGE
SETTING on page 27 (for VGA source) or page 28 (for video signals).
The displayed texts are
blurry.
For VGA input, touch
on the keypad to auto-adjust the display.
Adjust the IMAGE SETTING (see page 28).
The OSD menu can’t be
called out.
The OSD is locked; unlock the OSD (see page 14).
Red, blue, green, white
dots appear on screen.
There are millions of micro transistors inside the LCD display. It is
normal for a few transistors to be damaged and to produce spots. This
is acceptable and is not considered a failure.
No audio output. Check if the volume is set to 0 (see page 14 or 37).
Check if AUDIO is set to OFF (see page 37).
For VGA or DVI input, check the audio setting of the computer.
Nothing happens when I
press
.
SOURCE DETECT setting is set to AUTO. To manually select the input
source signal, set SOURCE DETECT to MANUAL (see page 38).
PIP mode does not work. The main and sub input source signals are not compatible to be
displayed together in PIP mode. Check the PIP Compatibility Table for
details (see page 34).
Cannot adjust Backlight
setting.
AUTO BRIGHTNESS setting is ON, disable AUTO BRIGHTNESS (see
page 40).
The displayed picture looks
distorted.
Adjust the aspect ratio (see page 15 or 31).
Dew formed on or inside
the LCD display.
This normally happens when the LCD display is moved a cold room to
a hot room temperature. Do not turn ON the LCD display, wait for the
dew condensation to disappear.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ag neovo HX-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ag neovo HX-24 in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ag neovo HX-24

Ag neovo HX-24 User Manual - German - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info