534691
24
Zoom out
Zoom in
Previous page
1/43
Next page
Afinia H-Series 3D Printer User’s Manual
24
Fill Settings
There are four ways to fill the interior of the parts, as described below.
Shell
Selecting the Shell setting will allow you to print a solid part as hollow by removing the fill material
regardless of the Fill setting.
For example, when printing a sphere 4cm in diameter at 0.15mm resolution, the most open fill
setting, and the rest of the settings at the default values will use 9.3 grams of filament and print in
61 minutes. Checking the Shell setting will reduce the material use to 5.4 grams and print time to
36 minutes by not printing the fill material.
Some models may not be suited to printing with the Shell setting checked.
This will not affect the printed models wall thickness or support material requirements.
Surface
Selecting the Surface setting will allow you to print a model as a single-layer outline of the model
perimeter. Note that this setting will not work with models having a base, solid top, or requiring
any inner fill structure.
The part is nearly solid plastic, giving you the
strongest structure. This Fill setting is
recommended for functional engineering
parts.
The interior of the part is filled with a
reasonably small scaffold structure. This is
the default Fill setting.
The interior of the part is filled with a medium
spaced scaffold structure.
The interior of the part is filled with a large
spaced scaffold structure, using the least
amount of material.
Mac setting: Solid
Mac setting: Hollow
Mac setting: Loose
Mac setting: Big Hole
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Afinia H-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Afinia H-Series in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info