Note! Batteries must be replaced by trained professionals only.
Warning! Batteries contain high energy and can spark, resulting
in a possible fire hazard.
Warning! Working with batteries can cause damage and Injury
if not done properly.
In this procedure, refer to Figure 12.
1. Remove the terminal insulating cap from one battery
terminal.
2. Using a 10/13 mm key, unscrew the wiring from the terminal.
Take care not to let the key touch any other terminal or metal
part, as this could cause damage or injury.
3. Repeat steps 1 and 2 for all the other terminals.
4. Remove the old batteries and install the new ones.
5. Connect the wires of the new batteries as shown in Figure 11
(also shown on the label located near the batteries).
6. Screw down the terminals securely, and replace the
insulating caps.
