782361
106
Zoom out
Zoom in
Previous page
1/136
Next page
100
SCOOPY+ S - User Manual
5.10. "MAINTENANCE" tab
This tab leads to a selection between several pages dedicated to maintenance aspects.
5.10.1. "LOGIN DATA" page
This page is for setting the password for logging in the html pages. In a classic way, to set up a password
you must first enter the current one, then enter the new one and confirm it.
Reminder: this password has no relationship with that for unlocking the restricted access on the
keypad/display front panel interface.
If you lose the password: using the front panel interface of SCOOPY+ S, perform a complete reset of the
settings, or a complete "factory reset". The passwords (front panel and html access) are then reset as
well as the other parameters in the unit.
You can also configure on this page the connection to an FTP server (used to upload recorded audio
files). The common parameters can be found: address or domain name of the server, username and
password.
Remember to save changes, clicking the relevant "Save" buttons!
5.10.2. "TESTS" page
This page provides the same choice as the Maintenance / Tests sub-menu (see in 4.4.8 and 2.5.7,
"Test functions", the description of the various test loops available).
Do not forget to disable the test loops (setting "None") to come back to normal operation!
5.10.3. "SYSTEM UPDATE" page
This page allows you to upload a file into the unit and update the firmware.
The firmware update file must be provided to you by AETA (usually available for downloading from the
web site). The procedure is rather simple:
First read carefully the instructions and warnings provided with the update file. In some cases,
you might have to do some preparatory action.
From this "SYSTEM UPDATE" page, click "Browse", find and select the update file.
Click the "Update" button. The process begins, and a warning message is also displayed on the
SCOOPY+ S front panel.
Wait for the completion of the update. Normally the unit should reboot by itself at the end of
the process.
Usually the memorized settings are still valid after such update. However, for maximum safety
you can perform a complete "Factory reset".
This procedure requires maximum care, because such update always implies some risk. Please note
these additional recommendations:
Beforehand backup/export the recorded profiles and snapshots, if you would like to use them
again afterwards.
Make sure the link between the control computer and the SCOOPY+ S is stable (no interruption
should happen during the process).
Make sure the SCOOPY+ S is not powered off and its Ethernet interface is not disconnected
during the process, do not use its keypad during the process.
If needed, re-import your profiles, presets and snapshots after the update. But be aware that,
although we try to keep a maximum upward compatibility, AETA cannot guarantee the re-
usability and consistency of these memories after a firmware update.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info