Manual Aeta Scoopy plus S (page 85 of 136) (English)

782361

Zoom out

Zoom in

1/136

SCOOPY+ S - User Manual

"Network quality" setting

Depending on the quality of service provided on the network, especially its jitter performance, it is

possible to change the stability/latency compromise used by the SCOOPY+ S. For this purpose, a setting is

available among the settings of each IP interface (for instance, for the Ethernet interface: sub-menu

Setup / Network / Ethernet Parameters / Network Quality). Six options are proposed:

 "Very High": suitable for a very good quality network, with very low jitter and packet loss

rate; latency is the smallest, but the codec will be very sensitive to possible jitter.

 "High": suitable for a good quality and low jitter network; latency is minimal, but the

codec will have little tolerance to possible jitter.

 "Middle": intermediate (and default) setting, suitable for a moderate transmission jitter.

 "Low": to be preferred when the network has low QoS (Quality of Service), especially

for residential ADSL lines. This setting ensures a safer operation, at the cost of a high latency.

 "Bad": to be used when the network is very disturbed, as can be found e.g. on mobile

networks. The latency is significantly higher than the above setting.

 "Very Bad": to be used in worst case, very poor quality mobile networks. This choice also

gives the highest latency.

On a LAN and/or private network with a controlled quality, the "Very High" quality setting is

recommended, as it yields minimum latency.

On the contrary, it should be avoided for a link via the Internet, as it can only tolerate a very low jitter.

One solution can be to start with a "Middle" setting, and move to the "Low" setting, or further, if too

much audio disturbance is heard.

 This setting is adjustable separately for every available IP network interface.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeta Scoopy plus S Manual

Product: