782361
12
Zoom out
Zoom in
Previous page
1/136
Next page
6
SCOOPY+ S - User Manual
1.4.2. Set up a (mobile) IP link
For a link over a public IP network via an access router with NAT1, it is recommended to use
a STUN server.
The address of a STUN server can be set in the SCOOPY+ S html pages (see page 95) or via the menu:
Setup / Network / AoIP Parameters / STUN Server, enter the address of a STUN server (we
propose our server stun.aeta-audio.com, look also the support pages on our web site www.aeta-
audio.com). Enable or disable STUN with Setup / Network / AoIP Parameter / STUN Mode (On
or Off).
More details: see page 122.
In the menu Setup / Network / Mobile Parameters, select Mode / IP Mode
Come back to the menu Setup / Network / Mobile Parameters. In the sub-menu Preferred
Techno, if needed you can force a priority for 3G or 4G networks. The standard setting is
Auto.
Still in the Setup / Network / Mobile Parameters menu, enter the sub-menu Access Point
/ APN: enter the operator’s APN code, using the keypad, then press .
Come back to the previous level (Setup / Network / Mobile Parameters) by pressing .
Go to the Data Active line and press to activate the mobile data (the box is then
checked)2.
Come back to the home screen using the key.
Select the audio coding: menu Setup / Algorithm, then Other, then . Browse the available
choice with the arrows, and make a selection with . Restart the same procedure to change
for another coding setup.
Using the keypad, enter the remote number to call (numeric IP address, or SIP URI if a SIP
server is used), then press the key.
Hang up with the key (you must confirm by pressing again).
When using a SIP server, some data must be entered beforehand using the AoIP Parameters
menu; for more details, refer to page 54. Similarly, some preliminary settings may have to be
done for the "Direct RTP" mode (without the SIP protocol).
Note: the sequence is much simpler for further calls as long as you keep the same SIM card, because
the network related settings are kept memorized even if the unit is switched off; so you don’t need to
make these settings again (IP Data mode, APN, data activation...). It is even possible to memorize
the PIN code: check the box in Setup / Network / Mobile Parameters / PIN Save.
1 Network Address Translation, which is performed in most cases by the access router.
2 Like on a smartphone, this data activation stays memorized, and you need not do this again each time the unit starts. Conversely, make sure
to disable it if later you don’t want any data traffic.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info