782361
9
Zoom out
Zoom in
Previous page
1/136
Next page
SCOOPY+ S - User Manual
3
1.1. Install and connect SCOOPY+ S
Plug on a power source or insert 6 C-size batteries.
Switch on SCOOPY+ S by holding down for 3 seconds. (And hold down for 3 seconds to
switch off)
Connect the necessary audio interfaces (details: page 20)
Connect SCOOPY+ S on the transmission network (details: page 38 and following)
Using the SCOOPY+ S menus: key or key to activate the main menu, use the joystick to
select a sub-menu or a parameter, enter or validate with the key. jumps back up to the
previous menu level, until getting back to the base screen (with level display).
(details: page 47)
1.2. Audio settings
The microphone(s) to be used must be active ("ON" LED); for instance press for
microphone 1 if not yet done.
Set the microphone gain to the middle position, white dot up. Make a test with the
microphone. If the level is too strong or too weak on the meters, adjust the gain via the menu
Setup / Audio / Inputs / Input x Settings / Gain, so that you reach an adequate level (see
details further on page 62).
1.3. Select and set up network to be used: wired networks
Select network: Setup menu then Network, then select Change Network, . In the
proposed choice, select the desired network (ISDN, Ethernet, POTS). Validate with .
Select the audio coding: menu Setup / Algorithm, then Other, then . Browse the available
choice with the arrows, and make a selection with . Restart the same procedure to change
for another coding setup.
The available choice depends on the transmission network! For more details on coding, see
page15.
1.3.1. Set up an ISDN link
If needed, select the protocol with Setup / Network / ISDN Parameter / Protocol. More
details: see page 57.
Enter the remote number to dial, using the keypad, and press the key.
If more than one B channel is involved due to the coding algorithm used, you must enter a
second number, then . If the last dialled number is adequate, just confirm by pressing
without typing a number again.
Hang up with the key to release the connection (you must confirm by pressing again).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info