587633
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
Italiano
IMPOSTAZIONI
Da eseguire in fase di installazione solo da personale specia-
lizzato.
Alcune funzioni non sono compatibili tra di loro, per questo
sono stati posti dei limiti alle configurazioni dei Dip-Switch.
Agendo sui Dip-Switch all’interno del termostato otterremo le
seguenti funzionalità:
Sw1 Dip 1 (Default OFF)
Presenza della valvola acqua:
- Presente, impostare (ON).
- Assente, impostare (OFF).
Sw1 Dip 2 (Default OFF)
Posizione della sonda temperatura acqua:
- Sonda temperatura acqua posizionata a monte della valvola,
impostare (ON).
- Sonda temperatura acqua posizionata a valle della valvola,
impostare (OFF).
Sw1 Dip 3 (Default OFF)
Gestione della valvola acqua:
- Ottimizzata, impostare (ON),
a caldo: chiusura valvola ritardata rispetto allo spegnimento
della ventilazione;
a freddo: chiusura valvola anticipata rispetto allo spegni-
mento della ventilazione.
- Normale, impostare (OFF).
Sw1 Dip 4 (Default OFF)
Correzione sonda:
- Correzione fissa, impostare (ON).
- Correzione dinamica, impostare (OFF),
calcolata sulla basa della temperatura dell'acqua.
NOTE:
*
= Nei ventilconvettori dotati di 2 valvole installati in impianti a 4 tubi non è consentita anche l'installazione del depuratore d'aria PLASMACLUSTER
®
.
- Per un corretto funzionamento della sonda ambiente SA verificare che il Sw2Dip3 sia in posizione ON ed il jumper in posizione INT.
Sw1 Dip 5 (Default OFF)
Temperatura di abilitazione del funzionamento a caldo:
- Ridotta, impostare (ON).
Temperatura minima dell'acqua 35°C.
- Normale, impostare (OFF).
Temperatura minima dell'acqua 39°C.
Sw1 Dip 6 (Default OFF)
Temperatura di abilitazione del funzionamento a freddo:
- Ridotta, impostare (ON).
Temperatura massima dell'acqua 22°C.
- Normale, impostare (OFF).
Temperatura massima dell'acqua 17°C.
Sw2 * Dip 1 (Default OFF)
Selezione del tipo di impianto in cui è inserito il
ventilconvettore:
- Impianto a 4 tubi, impostare (ON).
- Impianto a 2 tubi, impostare (OFF).
Sw2 * Dip 2 (Default OFF)
Presenza del purificatore d'aria PLASMACLUSTER
®
:
- Presente, impostare (ON).
- Assente, impostare (OFF).
Sw2 Dip 3 (Default ON)
Abilitazione sonda temperatura aria:
- Sonda interna del pannello comandi, impostare (ON).
- Sonda nel ventilconvettore, impostare (OFF).
Sw2 Dip 4 (Default OFF)
Opzione non disponibile
ON
OFF
123
4
5
Sw1
6
1
2
3
4
*
*
*
*
Sw2
CONFIGURAZIONE DIP SWITCH
Valvola acqua presente
Sonda temperatura acqua posizionata a monte della valvola
Impostazione di fabbrica
Opzione non disponibile
Sonda interna del pannello comandi
PLASMACLUSTER
®
presente
Impianto a 4 tubi
Temperatura massima dell'acqua 22°C a freddo
Temperatura minima dell'acqua 35°C a caldo
Correzione sonda fissa
Gestione Ottimizzata della valvola acqua
Correzione sonda dinamica
Temperatura minima dell'acqua 39°C a caldo
Temperatura massima dell'acqua 17°C a freddo
Impianto a 2 tubi
PLASMACLUSTER
®
assente
Sonda nel ventilconvettore
Gestione Normale della valvola acqua
Sonda temperatura acqua posizionata a valle della valvola
Valvola acqua assente
Sw1
JP1
EXT
INT
Sw2
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aermec PXA E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aermec PXA E in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info