587610

Aermec MODUCONTROL Manual

63
Zoom out
Zoom in
Previous page
1/184
Next page
63
EN
IMDCFJ. 12.05 6343841_03
Fig.9a Fig.10a
PASSWORD = 031
INSTALLER 2 menu
To access the INSTALLER_2 menu, follow the same procedure described for the INSTALLER menu; the only difference
is the value of the password, which is 31.
WARNING The following parameters
must only be modifi ed by qualifi ed
personnel authorised to install the
unit.
Setting operational parameters (installer level)
Threshold for reactivation after shutdown force off
Index - String
MIN
value
MAX
value
Parameter function
0 °C 30 °C
If the parameter value rin = 4 (parameter 8 of the Installer menu), then this is a probe storage system,
this parameter indicates how much lower the threshold of force off so as to prevent the compressor is
reactivated after the intervention of ForceOff dynamic extinguished soon after.
Configuration of the heating cable (ANK only)
Index - String
MIN
value
MAX
value
Parameter function
02
Setting the output to which the heating cable is connected:
0- no heating cable
1- heating cable on the CPA output
(the parameter (0) of the menu with password=72 “according to CP must be 0”
2- heating cable on the VGC output if not used (the configuration of the dip switches must be: DIP1 =
ON, DIP2=ON, DIP5=ON, DIP8=OFF, DIP9=OFF)
Heating cable setpoint (ANK only)
Index - String
MIN
value
MAX
value
Parameter function
-20 °C 10 °C
Heating cable activated with an external air temperature lower than the value of this parameter.
Heating cable deactivated with an external air temperature higher than the value of this parameter, plus
1.0° hysteresis.
Thermostat pump switch-off
Index - String
MIN
value
MAX
value
Parameter function
01
0 = the pump continues to function when the set point temperature is reached. 1 = the pump switches
off when the set point temperature is reached (when this option is selected, the adjustment is automati-
cally activated on the basis of the input temperature). This parameter is only visible with the adjustment
on the basis of the input temperature (parameter (0) =1 or 2).
… 63 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aermec MODUCONTROL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aermec MODUCONTROL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info